 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Brake rotor removal 82 datsun 4WD
Hi- we have an 82 datsun p/u 4WD that needs resurfacing of front brake rotor. Have removed caliper but can't get "plate" off that allows removal of rotor- is there a trick, or hidden bolt? Hope someone has some solution. Thanks, Lynne
|
||||
|
||||
|
The normal procedure is to remove brake caliper (12 mm), pads, caliper mounting bracket (15 mm), and disc. Support caliper with a piece of wire. You may need to spray the caliper mounting bracket bolts with Kroil or PB Blaster and use a breaker bar or air impact wrench. There may be a small, round spring retainer that needs to be pryed off a mounting stud with a small screwdriver, in order to remove the disc from the hub. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello, Having trouble removing the brake light bulb from the socket on a 2005. I've gotten to the socket with a 1/4 turn but the bulb looks like it's locked in with 4 small plastic pins, (2 on each side with a wedge hook). Do I need a special tool? Any help most...
Have removed the screw on the rotor.. does it just pull off now.. it won't seen to move.. do I just try harder or is there something I'm not doing?
What would cause the emergancy brake light to stay on after the emergancy brake has been released on my 2002 Ford Explorer?
Hello, I have my distributor off an trying to remove my rotor. The how to's I have read mention cranking the car to expose a philips screw on the shaft of the rotor. I do not see a philips head screw anyplace on my rotor. Either the shaft or top of it. Any help appreicated. -steve
How do I remove the brake rotor on a 1992 honda accord
View more questions Search
|
