Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honda rotor is melting in distributor
[ 2 Answers ]
I have a 1990 crx 1.5 liter. The rotor has melted and spun on the shaft twice now. It appears to be getting very hot and then spinning. The coil is inside the distributor. Is this the cause of the heat or could it be something else? Thanks roy
1992 honda accord rotor removal
[ 5 Answers ]
Hello, I have my distributor off an trying to remove my rotor. The how to's I have read mention cranking the car to expose a philips screw on the shaft of the rotor. I do not see a philips head screw anyplace on my rotor. Either the shaft or top of it. Any help appreicated. -steve
90 Honda Accord Distributor Rotor .
[ 4 Answers ]
... I have no idea how to remove the rotor on my '90 Accord's distributor so I can test the coil. Any guidance would be greatly appreciated! -Geo.
92 civic distributor rotor seized
[ 1 Answers ]
I'm trying to remove the remaining distributor rotor which appears to be seized. There is a philip srew that I can't remove. Is it work fixing it or should I buy a whole ignition unit?
Honda del sol - distributor rotor not spinning - what do I buy?
[ 7 Answers ]
Hi I found some of my answeres - here is where I am at. My car died while I was driving it the other day - just quit running. The crank turns and everything sounds right it just won't start. I checked for spark and found none. So I took off the distributor cap and the rotor thing in there... View more questions Search
|