Ask Experts Questions for FREE Help !
Ask
    mikemohr97's Avatar
    mikemohr97 Posts: 4, Reputation: 1
    New Member
     
    #1

    Dec 16, 2008, 03:56 AM
    My furnace won't exnite after power outage!
    I have a Day & Night furnace Model # 80CD-12A Series 152, It was working fine until we had a power outage. Now the pilot light has a flame, but when I turn the thermostat on the burners don't exnite. Do I need to turn the (furnance) gas totally off and restart the whole system? Is there a safety I'm over looking? Any help would be appreciated.

    Thank You,

    Mike
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #2

    Dec 16, 2008, 04:27 AM

    Start with the basics: check the power supply by switching the thermostat fan selector to on- does the blower run? No need to turn off gas & relight.
    mikemohr97's Avatar
    mikemohr97 Posts: 4, Reputation: 1
    New Member
     
    #3

    Dec 16, 2008, 04:25 PM
    Quote Originally Posted by KC13 View Post
    Start with the basics: check the power supply by switching the thermostat fan selector to on- does the blower run? No need to turn off gas & relight.
    =I've checked the basics, blower fan works if I switch in on inside the unit. I have the old style thermostat. Glass tube with copper contacts and a small resistor soldered to 3 yellow wires.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

A.C not operating after power outage [ 1 Answers ]

I had a power outage (15hrs) in my town - The ac unit did not kick on after power was restored - I replaced fuses to the unit - checked the breaker - put fresh batteries in the thermostat (White-Rogers 1F80-51) The fan will operate but the compressor will not -

Partial Power Outage [ 6 Answers ]

An amazing (to me) thing happened at our house yesterday. About mid morning, we started to notice several of our lights were out. Also, the stove had no power, but the fridge did. 3 of my GFCI circuits could not 'test' or reset at all indicative of no power. Several circuits were fine others...

Power Outage [ 4 Answers ]

The upstairs of my house consists of two rooms that are powered by two 20 amp breakers which are tied together. A few days ago one of the rooms lost all power while the other room continues to work fine. The power is still out and I have reset the breaker several times and this doesn't work. ...

AC after power outage [ 2 Answers ]

After coming back from a family trip, we found that there had been a power outage. Several breakers were off position and some electronics (especially telephone) are completely dead. Now, after resetting the breakers, all the power problems are OK except AC. The control panel of AC seems...

Power outage Generators [ 7 Answers ]

Got my house pretty well up ;and running, with your help.. Today was informed, Electricity will soon be cut to 4 hrs a day.. so back up generator may be the answer.. Question is, how to tell what size genarator should I get.. Got a 150 Amp Svc, Elect stove, Washer, dryer, water htr, AC about 4...


View more questions Search