 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
John Deere LX178 float sticking
My LX178 runs like sh-t. I have replaced the float, cleaned the carb. Replaced the hoses.
After running for about 20 minutes it starts to spuder and backfire. Gas comes out of the over flow hose. I lose all power. I have taken to the dealer twice, it runs fine a couple times then right back to the problems. If you have any sugestions I would Really appreaciate it. Thank You TotallyFedUp |
||||
|
||||
|
Fedup, you could be having a fuel system malfunction,or trash in the tank, or the fuel system lines. Will it restart after it dies? If it doesn't without a cooling period of about fifteen to thirty minutes, it could be the coil breaking down. As a coil heats up, if it is going bad, it will begin to separate internally, which could cause this as well.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
When I try to engage my deck the tractor starts to die. When I click the deck off it runs without problems what's up?
A stick broke two of the plastic fan blades on the fan that sits on top of the trans axle. The grand kids were using the mower for a dune buggy. Anyhow I think its called a trans axle this is causing the belt that rides on the fan pulley, to vibrate quite bad. I want to replace the fan. Any advise...
Blades won't engage and when you try to engage them the mower wants to quit running.
John deere model L110 Mower was working fine. I got off it to add more gas, when I got back on it would not start. I turn the key and nothing, no clicking, nothing. I disconnected the pressure switch from the seat and still nothing. Mower blades are not engaged. What am I missing, it still...
View more questions Search
|
