Ask Experts Questions for FREE Help !
Ask
    DSBergers's Avatar
    DSBergers Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 6, 2008, 03:37 PM
    Janitrol HPT18-60 to Honeywell RTH230B
    I currently have the Janitrol HPT18-60. The wires that I have coming in and are connected are Y (lime green), G(dark green), R (red), O (orange), W2 (white), E (grey), C (blue), and black which is unused. The HoneywellRTH230B only has the 5 connections. Rh jumpered to Rc, W, Y, and G. To add to the issue, I have a Lux in the basement. It has 4 wires but only two are used - Red and White. The unused in the basement are black and blue (I think). I don't care if the one in basement doesn't work because I do not believe I have a dual zone unit (Plus if you try to adjust it, nothing happens anyway and there are no ducts anywere in the basement. So how do I connect the old wires to the new unit. Also everything is electric and ran through the same unit. I have something outside that runs that I think is a condenser and then the unit in the basement. Thanks for the help.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Apr 6, 2008, 06:25 PM
    The thermostat you bought will not work for your system. See below under introduction.

    http://customer.honeywell.com/techli...0s/69-1800.pdf

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring diagram JANITROL HPT18-60 [ 15 Answers ]

Need a wiring diagram for a JANITROL HPT 18-60 thermastat

Replacing Janitrol with Honeywell RTH230B [ 3 Answers ]

I currently have a Janitrol analog thermostat. It has 7 wires hooked up. Terminal - Color Y - Yellow Com - Blue R - Red G - Green w2 - Looks white E/w3 - Looks pink O - Orange

Janitrol 7 wire to Honeywell RTH230B 5 wire [ 3 Answers ]

I currently have a Janitrol digital thermostat. I can't read the model #. It has 8 terminals and 7 wires hooked up. Terminal - Color Y - Yellow Com - Blue R - Red G - Green w2 - Looks white E/w3 - Looks pink O - Orange B - Nothing

Replacing janitrol hpt18-60 w/ honeywell rth230b [ 1 Answers ]

My existing thermostat is a Janitrol HPT18-60. Wich has 7 connections, and 6 wires... Y-yellow, G-green, R-tan, O-brown, C-blue, and a red wire connecting an E and W2. I'd like to replace it w/ a Honeywell RTH230B. Wich has... Rh, Rc, W, Y, and G. However, I cannot find a wiring schematic,...

Janitrol hpt 1860 to honeywell rth230b [ 2 Answers ]

Again, I checked the make and models of my thermostats to ensure I don't goof nothing Up. My janitrol hp 1860 wires: yellow to y, green to g, red to r. blue to o, White to e and jumpered to w2 and brown to c. The Honeywell RTH230B has Only 5 contacts, Rh, Rc, W,Y and G. I guess just for...


View more questions Search