Ask Experts Questions for FREE Help !
Ask
    replace's Avatar
    replace Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 6, 2008, 02:06 PM
    Replace toilet
    My house was built in the '40s. The existing toilet has two hold-down bolts on each side of the base. All new toilets, as far as I know, have one hold-down bolt on each side.

    How do I work around this apparent incompatibility?

    >Moved from Forum Help<
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Apr 6, 2008, 02:15 PM
    Hi replace:

    The two most forward bolts will just be johnny SCREWS.. they just rotate out as normal screw... may need to get pliers or good pair of vise grips out to remove these... but only after old toilet has been removed completely.. then unscrew these and should be all set to install normal toilet with regular johnny bolts... see pics. Below.

    You will see what I mean when old toilet is removed...

    Do you know how to measure for a new toilet..

    Let me know if need more... Mark
    Attached Images
      
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace parts inside toilet tank . [ 9 Answers ]

Feel I need to replace the parts inside my toilet tank... After water has stopped, I cannot hear anything, but I sometimes notice a trickle of Water still coming into the bowl. I would like advice on best brand name to purchase so I can replace myself. Lowe's and Home Depot are in my...

Toilet drain pipe below floor; need to replace flange [ 5 Answers ]

The toilet in our master bedroom was leaking around the floor. I turned the water off, flushed it one last time to get the water out of the tank, and called the plumber, who stopped by today. I wasn't there, but my g/f took a bunch of notes. He unbolted the toilet and pulled the flange out...

Replace toilet flange [ 1 Answers ]

How do you replace a broken toilet flange in a cast iron pipe in a cement floor?

Should I replace lead bend of toilet? [ 1 Answers ]

I just had an expensive toilet job: replaced flush and water valves in toilet tank. Because bowl was leaking onto floor, plumber replaced rotten wax ring under bowl. When he flushed the drain pipe or lead bend pipe, he said that it must be replaced due to back pitch and cracked flange. He said...

Replace Lead Pipe from Toilet to Hubless Waste Pipe [ 3 Answers ]

My house is a craftsman style house from 1912 in Oakland, California. I have a big hole in a 24" horizontal lead pipe that bends at 90 degrees and connects the only toilet in the house to the hubless waste pipe. How do I go about removing the lead pipe? (What tools do I need and what type of...

View more questions Search