Ask Experts Questions for FREE Help !
Ask
    hobogirl's Avatar
    hobogirl Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2008, 10:45 PM
    Faucet PSI
    I have a single hole roman tub filler but have low gallons per minute. Do I need a high pressure valve or something to get more psi ?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Apr 5, 2008, 04:45 AM
    How is the pressure at other faucets in the house. Remove and clean the aerator.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Apr 5, 2008, 05:37 AM
    Harold asks a good question. How is the pressure throughout the house? What is the brand name of your tub faucet? Regards, Tom
    hobogirl's Avatar
    hobogirl Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Apr 5, 2008, 10:15 AM
    The faucet is a Price Pfister and it is brand new. The water pressure in the rest of the house is good including the shower. Could it have anything to do with the fact that it is a single handle roman? Do we need special valve to create more pressure? Thank you Vicki
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

25 psi max pressure [ 13 Answers ]

Hello I had a jet pump that would only build 40 psi originally 50psi. Checked pressure tank with no water in system and it had 0 psi, it wasn't water loged. Filled to the proper 28 psi and tried pump still 40 psi. tank still held pressure for week plus no leak there. Decided to get a new pump...

Very low hot water psi [ 10 Answers ]

I have an oil furnace with an expansion tank. While having some work done on the furnace, the repair person noticed the flow of the hot water. He said he cleaned something which only took him a few minutes and we had great hot water pressure. Of course it has happened again and trying to work this...

PSI Setting for oil furnace [ 1 Answers ]

My furnace is about 15 yrs old and the psi is at 25. Is that OK or should it be at 20.

Low H2O psi, remedies? [ 1 Answers ]

Holding tank alone, holding tank with pump, other solutions?? THanks

Well Water at 20 psi - then drops! [ 3 Answers ]

Do I need a new well? I have had low water pressure for about a week. I checked the pressure tank and pumped it up to 60 psi. Is that too high - too low? Did not fix the problem. We have a well. Water table is fine - east coast. I checked the pressure gauge of the pump and it is 20 -...

View more questions Search