 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore he3 dryer
My dryer occasionally stops before clothes are dry, sometimes displaying an E1 code. My manual says to call a repairman for this. Where can I find definitions for the E codes? I think it is probably the thermostat or moisture sensor. Is there anywhere I can order the parts, with installation instructions?
Many thanks in advance if you can help. |
||||
|
||||
|
Try any of the following Sears links :
http://www.sears.com/Service http://www.searspartsdirect.com/partsdirecta http://www.searspartsdirect.com/partsdirectb |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Dryer is getting electricity because the lights come on when a drying selection is pushed. The drum will not turn. When I press the start button, I hear a clicking sound and nothing happens after that! What's up with this?
If I do not ground the dryer it will turn on. I just got a he3 dryer but I live in a old house with a 3 prong outlet and the dryer wire is a 4 prong and I replaced the 4 prong wire for a 3 prong wire. When I tried to star up I just heard a click and the dryer do not work. What is wrong with the...
My kenmore HE3 Elite dryer has power but the dryer will not start when the start button is depressed
I have had the dryer for about 3 years. When you try to dry clothes as soon as it gets hot it will shut off. I have taken the front off and cleaned it out. However I did not find enough that should cause a problem. :confused:
View more questions Search
|
