Ask Experts Questions for FREE Help !
Ask
    Build it better's Avatar
    Build it better Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 26, 2008, 01:04 PM
    Wiring baseboard heater
    Can I run hot 220v to either end of heater and wall mounted tstat double pull to either end?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Mar 26, 2008, 01:20 PM
    The 240 VAC needs to connect into the thermostat. I don't believe that there are thermostats on each end of the heater.

    Also, if the unit is functioning correctly, why mess with it. Leave it alone.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Baseboard heater wiring circuit [ 6 Answers ]

I just finished intaling a baseboard heater and I have a question that has been nagging me. The heater is on 240 circuit. So, I ran 12/2 and used the black and white to run my two hot wires as is common practice. Please excuse my ignorance on this matter, but this got me wondering. I have...

Wiring for baseboard heater [ 1 Answers ]

I need help wiring my downstairs with baseboard heaters. First Heater: I have the main power supply and wire from the thermostat coming in. I then have a wire running from my first heater to the second heater. The heaters are 220-volt. What wires do I connect in order to complete the circuit?

Baseboard heater wiring [ 1 Answers ]

I have 3 separate 12-2 cables going into the thermostat box each cable contains a black, red and a ground. One of the wire comes from the power supply and the other 2 wires are for 2 separate baseboard. My thermostat is a Honeywell RLV340. It has two black wires. How should I wire these...

Baseboard heater wiring [ 3 Answers ]

Hi All, I have a question about wiring my base board heaters. I am currently re-wiring my basement, adding a few heaters on the original 240V-20A circuit. It will be handling a total of 3500 W, no problem. The question is about the wiring itself, here's what I intend to do: Run from...

Wiring Electrical Baseboard Heater [ 4 Answers ]

I Have A Few Concerns Wiring A New Electrical Baseboard Heater.the Heater Is A Marley 22ov,2000w,9 Amp Hydronic Heater.wall Mounted Thermostat Is A Fahrenheit Md26 Double Line Break.I Am A Little Confused As To What Type Of Breaker I Need To Install.I Have A Cutler Hammer Subpanel.do I Need A...

View more questions Search