Ask Experts Questions for FREE Help !
Ask
    Debbie41's Avatar
    Debbie41 Posts: 3, Reputation: 1
    New Member
     
    #1

    Mar 22, 2008, 07:49 AM
    Re-configuration of bathroom
    I want to re-configure my bathroom. I want to keep the bath and sink but replace the toilet. What sort of expense should I expect from a plumber to do this. It's a small bathroom, 9ft by 8ft. I want to put the bath under the window where the sink and toilet are the moment and the sink and toilet where the bath is that the moment. Upstairs, floorboards on the floor (currently covered with lino). There is an adjoining huge cupboard on the landing and I want to put the shower in there instead and turn that into a shower cubicle, currently it is a tall walk-in cupboard. Thank you.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Mar 22, 2008, 08:01 AM
    It is very difficult to give even a ballpark number since we do not know the labor rates in your area. Also, without seeing the house it is really hard to picture installing new drain lines and supply. A real rough number would be $6000
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Mar 22, 2008, 08:05 AM
    Hey Debbie,
    The word "upstairs" was used so I assume the bath's on the second floor. You're going to have a big mess. The ceiling will have to come out for the plumber to reconfigure the drainage. Get three estimates before letting out the contract. Pick the one you're moist comfortable with. This isn't always the lowest bid. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tc tuner configuration [ 1 Answers ]

Dear Sir; I have d845ewgew intel desktop board and 1.2 GHz inel processor I have installed TV tuner I only heard voice but cant'nt seen image I live in pakistan so I configure them to pakistan and in vga card I configure them as a vga card please solve my problem. ...

Configuration [ 4 Answers ]

I am having a problem with my aunts computer. OK, when I turn it on it just pops to the screen "windows detected registry configuration choose command prompt scan reg". I don't know how to scanreg, its weird. Can you please tell me how to scanreg. The starting up screen or anything doesn't come on.


View more questions Search