Ask Experts Questions for FREE Help !
Ask
    Ray-Ray's Avatar
    Ray-Ray Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 19, 2008, 09:20 PM
    Charging system
    I have a 11 hp Craftsman model 502 and the wires at the Briggs have been cut but they both produce power when running, one low voltage and the other high. Any idea where they should go to charge the battery?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Mar 20, 2008, 01:19 PM
    You state both wires are "hot", one low and one high voltage?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1991 Dodge Ram Charging System [ 10 Answers ]

I am looking for a wiring diagram for the charging system on a 1991 Dodge Ram with a 360 engine. Please help? Thanks:)

Older Snapper Charging System [ 2 Answers ]

I just put a 12HP B&S on an 1980 Snapper Mower, I Have 2 wires coming from the engine charging system but not sure where I hook up to the mower its self? Can anyone help?

Charging system [ 2 Answers ]

I have a 98 chevy 1500, has a 105 amp alternator that is not doing the job now, I had it tested at different auto parts stores all say its not working. I have a snow plow mounted and only do a few driveways but push the switch to operate the plow and it uses a lot of power and that's typical it...

Mazda MPV Charging system [ 1 Answers ]

I have a 1990 MPV, the voltage regulator failed (which meant a new alternator). After renewing alternator the battery failed, renewed it. NOW after starting the engine the alternator charges 14.5 volts for a few minutes then quits charging (12 volts). The alternator will begin charging after an...

Murry Riding Mower Charging System [ 2 Answers ]

I replaced my battery in my 13.5 hp Murry riding mower. I got two starts on it and the battery died. I had the battery tested and it was good. I was told the starting solenoid would not be the problem. The battery is not getting recharged. The key is in the off position, my lights are not...


View more questions Search