Ask Experts Questions for FREE Help !
Ask
    adamcik's Avatar
    adamcik Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 17, 2008, 04:53 PM
    Older Murray riding mower
    I have a "96 model Murray "widebody" 48"cut riding mower. It has a B&S 18 1/2 h.p. twin cylinder motor - model #42A707. The model of the actual mower body is missing (supposed to be under the fold up seat). I need to get part numbers for various belts... main drive belt... secondary belt and a long thin trans belt for the Hydro trans. Somehow, somebody should be able to take the above information and cross reference a 48" cut Murray mower... It seems that not too many were made and for not too many years but since the bankruptcy of Murray... information,diagrams and owners manuals seem to be long gone. Somewhere, in my research, I have a code#9610225A and a type... 1653 01 and a model number of 42A707. Please help because the tractor /motor is in real good shape but the deck has many worn parts... Over the years, I've replaced all three blades, all three spindles and all pulleys but I really need a diagram of the mower body with part numbers, etc... HELP!
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Mar 19, 2008, 09:37 AM
    Well actually in the later 90's, there are different belts for what is seemingly the same mowers. How are you coming up with the year of '96?
    fired0g's Avatar
    fired0g Posts: 2, Reputation: 1
    New Member
     
    #3

    Mar 13, 2009, 06:57 AM
    I have a 2002 42"cut Murray riding mower. It has a B&S 15 h.p. - model #313707. The model of the actual mower body is 425612X99A. I need a digram on how to change the drive belt. Any help will be very appreciated.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Old Murray riding mower [ 8 Answers ]

I bought an old Murray riding mower last year. I'm not sure what year it is, but here is my problem: One of the rear tires has a flat, instead of loading up the whole mower in the back of the truck, I wouldm like to remove the wheel. I removed the holding pin and the washer from the outside of the...

Mower Replacement Belt, Old Murray Riding Mower [ 2 Answers ]

I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.

Murray riding mower [ 3 Answers ]

I have a murray riding mower that I have replaced the solinoid and the starting switch but I still get no power to the starter. I can hot wire the starter and it will crank so there must be a problem somewher in the wires??

Murray Riding Mower [ 1 Answers ]

I bought a used Murray riding mower with a 40" deck. I want to add a mulching kit but can't seem to find one. Does anyone know if there are any interchangeable parts that will fit this mower?


View more questions Search