Ask Experts Questions for FREE Help !
Ask
    applecheeks's Avatar
    applecheeks Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2008, 10:34 AM
    Whirlpool dryer clip
    Where do I get a clip that holds the bottom front oanel of my dryer in place? I have one on the left, but need another on the right.
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Mar 19, 2008, 06:14 AM
    There should be an appliance parts store somewhere close to you. Just look in the Yellow Pages under "Appliance Parts".
    Take the make/model of the dryer (and the other clip if you can remove it) to them and they should be able to help you out.

    Good Luck,
    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool dryer [ 3 Answers ]

My dryer recently stopped heating ,my gas was turned off recently ,does that effect my heating elemant?And also it did pop the breaker for the dryer... :rolleyes: :rolleyes:

Whirlpool dryer [ 2 Answers ]

Whirlpool dryer runs too hot and there are no obstructions

Kenmore dryer door spring and clip [ 8 Answers ]

First time asking a question here... Hope someone can help. I have a Kenmore 80 clothes dryer, Model 110.64842400, which I have taken apart to clean and replace the thermal fuse. I need to put the front of the dryer back together, but cannot figure out how/where to reattach the clips for the door...

Whirlpool Dryer [ 2 Answers ]

My dryer started smelling like it was burning and would not dry the clothes. I installed a new heating element and the thermal fuses. I turned it on and still it would not get the clothes hot, then Poof, sparks shot out and it kicked the breaker. I turned the breaker back on and it shot sparks out...

Whirlpool dryer [ 1 Answers ]

I have a whirlpool dryer and it want start... I turned my timer on and press the start button and want do anything.. but you can hear a noise at the timer button and when youn go to press the start button the noise stops... I am wondering if its the timer button or the start button?

View more questions Search