Ask Experts Questions for FREE Help !
Ask
    katerry_3's Avatar
    katerry_3 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 7, 2007, 02:52 PM
    Whirlpool dryer
    My dryer recently stopped heating ,my gas was turned off recently ,does that effect my heating elemant?And also it did pop the breaker for the dryer... :rolleyes: :rolleyes:
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Oct 7, 2007, 03:16 PM
    Shutting off gas will not trip the breaker, however you should check it to verify you have power to the unit. You could have air in the gas line. Is your pilot lit if you have a thermocouple? If you have an igniter instead does it glow?
    katerry_3's Avatar
    katerry_3 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 7, 2007, 03:23 PM
    Pilot is lit,how do you clear out air in gas line?.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #4

    Oct 7, 2007, 04:44 PM
    Crack the line, then retighten
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Dryer [ 1 Answers ]

My whirlpool dryer seems to be leaking from the bottom. There is a small pool of water underneath the dryer (towards the front) and beside the dryer door. Unfortunately, I do not have the model number handy. It's the type with the door on the side. Would appreciate any help you could give...

Whirlpool dryer [ 1 Answers ]

Hello I have a whirlpool dryer heavyduty super capacity and it is not heating at all I took the back off and the coil is not turning red can you help me thanks

Whirlpool Dryer [ 2 Answers ]

My dryer started smelling like it was burning and would not dry the clothes. I installed a new heating element and the thermal fuses. I turned it on and still it would not get the clothes hot, then Poof, sparks shot out and it kicked the breaker. I turned the breaker back on and it shot sparks out...

Whirlpool dryer [ 1 Answers ]

I have a whirlpool dryer and it want start... I turned my timer on and press the start button and want do anything.. but you can hear a noise at the timer button and when youn go to press the start button the noise stops... I am wondering if its the timer button or the start button?

View more questions Search