Ask Experts Questions for FREE Help !
Ask
    COOL7777's Avatar
    COOL7777 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 12, 2008, 06:52 PM
    Need new AC system
    A repairman is installing a carrier fy4anfo48 inside/ 24aca348a300 outside are these 4 ton units and i had a 3 ton unit, downstairs. Payne 0608a71992 inside/ carrier 38tkbo36300 outside, and i had a 2.5 ton unit. So are these truly 4 and 3 ton units and what ducting changes need to be done with these bigger units. My home is 3400 sq ft. your thoughts, i know nothing in this area
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 12, 2008, 07:00 PM
    The outdoor units are 4 ton and 3 ton.

    The duct changes will have to be calculated on the job. There is no way I could even guess as to what you have and what you might need since you are going with slightly lager units.

    You hired these people to do your job. If you do not trust them to do the job correctly I would hire someone else.

    NOTE I do not know where you live but that is a lot A/C for 3400 sg. ft.

    Did they do a manual J?

    Did they do a manual D ?

    You might ask the how they sized the unit and sized the duct work without doing those calculations.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why won't my infloor heating system circulate through the system? [ 3 Answers ]

I am having infloor heating circulation problems, My pump is running and the water at the pump is hot but it is not running through the rest of the piping. What would cause the water not to circulate?

System calling for heat but no response from system [ 1 Answers ]

My thermostat is set to 25 which is higher than the current temperature but my heating system is not firing up.. we have hot water - the boiler is a Micron - the heating timer is set to "on" on the program setting, and so is hot water which is fine but we have no heating, it was on earlier and went...

Smoke extract system & staircase press. System [ 2 Answers ]

I am working for a 35 storey tower. There are smoke extract and staircase/lift lobby pressurisation system in case of fire. Now consultant has already given the CFM required for these Fans, but I have to submit the calculations for the same to the Local Govt. authority. So please help me if...

How do I increase H2O pressure on well system with a water filtration system? [ 2 Answers ]

Howdy, I would like to know how I can increase my water pressure. My current system uses a well pump with a small pressure tank, and "D" control valve. It then runs through a WATERSOFT filtration tank, RAINSOFT water softner, and on the Hot water side, an AQUASTAR on demand hot water system. I...

View more questions Search