Ask Experts Questions for FREE Help !
Ask
    blackajck's Avatar
    blackajck Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 10, 2008, 06:59 PM
    Belt diagram
    I have a problem with putting a belt on a lawn mower, I'm looking for a diagram that shows it, if any one can help with a belt diagram, pleas do TY. :confused:...


    Here's the info for the mower briggs and stratton 15 hp 38" deck model #we1538 id #we1538b and it has weed eater on the side too..
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Mar 10, 2008, 07:21 PM
    We need to know the model of your tractor and which of the belts needs to be installed. Most mower decks have a decal on them somehwre that shows the deck belt. Can you give us the brand and model, if its sears just go to Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears Parts Direct | SearsPartsDirect.com from Sears and get a diagram from the manual.
    blackajck's Avatar
    blackajck Posts: 2, Reputation: 1
    New Member
     
    #3

    Mar 11, 2008, 03:01 PM
    Brand is weed eater, briggs and stratton 15 hp 38" model #we1538 or we1538b I'm trying to change the deck belt,ty
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #4

    Mar 11, 2008, 04:02 PM
    Not sure, but I think the belt will run across the rear of the deck, around the front of the two outer pulleys, to the inside of the two center pulleys to the pto pulley on the engine. (I think).
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #5

    Mar 11, 2008, 05:35 PM
    The deck belt forms a letter T The bottom of the T is the drive pulley (PTO) on the engine. The ends of each arm are the blade pulleys (two blade example) and the inside corners or armpits are idler/tensioner pulleys. Out by the blade pulleys you will likely see some keeper pins that try to keep the blet from jumping off the pulley and you can pry past them.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need '98 Murray transm. Belt diagram [ 3 Answers ]

I have a '98 Murray 30" 12hp riding mower. The transmission belt came off and needs to be replaced. Bought this mower used, so have no manual. First, is it worth the effort to try and do myself (pretty handy with a wrench:p ) or should I take it to a shop? Second, if I try to do it myself, how...

I need to replace my deck belt on my troybilt 17hr. 42' deck belt diagram [ 4 Answers ]

I need to replace my deck belt on troybilt 17hr. 42' riding lawnmover. Be nice to have a diagram

Belt diagram murray 17 hp 42 inch belt [ 4 Answers ]

I boke the primary belt on my murray 17 hp 42 inch mower and I can't seem to remember how it went on,please help.:o

Belt Diagram [ 1 Answers ]

I need a diagram for the positions of the belt for a Troy Built Pony lawn tractor The serial number is 1D046B80330

Murray 42' belt diagram [ 1 Answers ]

Belt is not turning and need to see how it should look when installed properly.


View more questions Search