Ask Experts Questions for FREE Help !
Ask
    jzboggs's Avatar
    jzboggs Posts: 4, Reputation: 1
    New Member
     
    #1

    Mar 8, 2008, 08:26 AM
    Hunter 44110 message
    I keep getting a message on my thermostat that says reco. If I hit the return button it goes away. But it just comes back later. What is it?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Mar 8, 2008, 09:33 AM
    READ page 7

    http://www.hardwarestore.com/media/pdf-misc/603274.pdf
    jzboggs's Avatar
    jzboggs Posts: 4, Reputation: 1
    New Member
     
    #3

    Mar 8, 2008, 10:53 AM
    Thank you. I just wanted to make sure there was nothing wrong.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Problems wiring Hunter 44110 thermostat [ 1 Answers ]

I just bought a Hunter 44110 thermostat for an old gas wall heater. Only two wires came out of the wall and were unmarked (even the old thermostat didn't identify + and ground). I have read the instructions and connected one wire to ground and the other wire to RH. Note there is a jumper between...

Wiring a hunter 44110 5-2 programmable thermostat [ 1 Answers ]

Am trying to install a new programmable thermostat and I am having problems. My old thermostat had the following wires: white, orange, red, green yellow and blue. The new Hunter thermostat has places for RH, RC, G, Y and W. I have tried several different configurations and cannot get the a/c to...

Hunter thermostat 44110 [ 2 Answers ]

I have hot water baseboard heat, and installed the hunter digital thermostat 44110, and followed the directions as directed, I had had wires W, Y and RH, I marked and installed Each of the wires, and put them where they were marked on the thermostat. I felt well and all of the lights ( temp,...

Hunter 44110 [ 5 Answers ]

How should the wires match up to the hunter: I have yellow, red, white, green and then a red jumper wire if I use the jumper wire and I connect all the others to the letters of the color codes what would I do with the other red wire. My AC is not cooling at all... I changed filter, batteries......

Hunter 44110 Programmable Thermostat Wiring HELP! [ 3 Answers ]

My current thermostat has the following six wires, hooked as follows: Orange to O Green to G Yellow to Y1 Red to R Black to C White to W1 I am attempting to install the Hunter Programmable thermostat, which only gives me 5 placements for wires:


View more questions Search