Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Electric motor wiring
[ 4 Answers ]
I have a hayward motor c48k2n143b1 and I cut the wires from the breaker switch to put a intamatic timer in the system. Somehow I rewired it wrong it keeps burning out the clock timer. It will run manually. But something is wrong. It has a green (ground?)and two red. So I have two red wires that...
Electric range wiring
[ 4 Answers ]
4 years ago my home passed electrical inspection with the range wired on a 10/3 wire in a 30 amp breaker. Today I am finishing out the basement and the inspector tells me I need a 40 amp breaker with a 6/3 wire. Has the NEC changed regarding this?
Electric wiring
[ 1 Answers ]
Is a ground fault indicator located in the breaker box?
Wiring a GE electric motor
[ 5 Answers ]
HI, I have a GE motor on my table saw that was wired for 220vac. I want to change it back to 110vac. Problem is that the wiring plate is missing. Motor number is 5KC49TG1458X IT'S A 2HP motor Currently it has the following wires connected motor has 4 threaded studs marked 1-2-3-4- Power...
Electric generator wiring
[ 3 Answers ]
I have a DeVilbiss electric generator 5000 watt 120/240 volt @ 41.7/20.8 amp- it has a switch that connects the 240 volt . It has one 120 volt outlet and one 120 volt 4 prong receptacle. As stated , it has a switch to connect the 240 volt capability. What I want to do is make a new pannel for... View more questions Search
|