Ask Experts Questions for FREE Help !
Ask
    loftguy's Avatar
    loftguy Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 2, 2008, 05:03 PM
    Bryant propane furnace and AC
    Hi,

    Have a chance to buy a 5 year old propane furnace, Bryant 135K BTU, upflow, with 5 ton blower air conditioner is Bryant, furnace model is: 383kav060135.

    Really just want the furnace but have to buy both.

    Any thoughts on this furnace? I presume I wouldn't have to install the ac unit if I bought it.

    Appreciate any help.

    loftguy
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #2

    Mar 2, 2008, 06:03 PM
    It's a good 80% furnace same as all. Will your duct work handel a 5 ton system with 135K BTU?
    loftguy's Avatar
    loftguy Posts: 2, Reputation: 1
    New Member
     
    #3

    Mar 2, 2008, 06:14 PM
    Hi,

    Not really sure as this is a house I am in the process of buying.

    Any way to recognize if the duct work can handle 5 ton, and/or could be modified to do so?

    Thanks,

    loftguy
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #4

    Mar 2, 2008, 06:39 PM
    Lets say you have a 3 ton system now the duct work would be sized for that system and the 5 ton would not work with that duct work. If you use the 5 ton you will need to move around 2000 cfm of air a 3 ton needs to move around 1200 cfm. To over size a system can be just as bad as being under sized.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pilot on propane furnace [ 2 Answers ]

I can't get the pilot on my prpane furnace to light

Need new propane furnace [ 2 Answers ]

Please give me suggestions on what to look for/ask about when getting estimates on my new furnace. I am a complete novice! THANK YOU!

Evcon propane furnace [ 1 Answers ]

I have an Evcon mod. CGU09516 furnace. Upon starting it seems to work OK. But when blower motor cuts in the flame cuts out.After doing this 2 or 3 times it cuts out and will not cut in anymore. ...


View more questions Search