Ask Experts Questions for FREE Help !
Ask
    ajuskin's Avatar
    ajuskin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2008, 07:15 AM
    Joining Corian counter sections
    I am a do it yourselfer and have joined seams of kitchen corian counter successfully, but the seams have a shadow line where the seam is. Moderate sanding has not removed the shadow. Any suggestions?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Mar 2, 2008, 07:19 AM
    To get more responses, you should move your question from Introductions to here:
    https://www.askmehelpdesk.com/interi...e-improvement/
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #3

    Mar 2, 2008, 07:28 AM
    (Question moved from Introductions to more appropriate topic area.)
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #4

    Mar 2, 2008, 08:22 AM
    I think I know what you are speaking of by a shadow line. Do you do a light sanding of you cut surfaces and do you clean them well before joining. A light sanding, particularly of the top edge of the cut surface, will probably prevent the shadow line.


    But wait, maybe Banjo3 will show up here, he's our new resident expert on solid surface counters.
    davidak's Avatar
    davidak Posts: 15, Reputation: 3
    New Member
    		  
    #5

    Mar 2, 2008, 08:30 PM
    Are we assuming that the colour of your glue is an exact match to your counter?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cutting corian counter top [ 6 Answers ]

What tools and what method can I use to enlarge a corian counter top cut out for a cooktop. I need to enlage the cutout by about 5/16 in in one dimension and 3/16 inch the other. The couter top is about 1 inch thick.

Filling Old Holes on a Corian Counter [ 2 Answers ]

The old 3 hole faucet is replaced with a 1 hole faucet. That long piece designed to cover the old holes isn't long enough so I didn't put it on at all. What's the best way to cover or fill the old holes in a Corian Counter?

Corian Counter Tops [ 2 Answers ]

How do I polish corian counter?

Corian Counter repair [ 1 Answers ]

Does anyone know what to use to repair scratches and gouges on a corian counter?

Corian Counter [ 2 Answers ]

What tool would you use to cut Corian? I have a piece from an old kitchen counter that I want to cut into a 20"x20" cutting board. It is about 3/4" thick and the longest cut I have to make is about 24". Thanks

View more questions Search