Ask Experts Questions for FREE Help !
Ask
    kiddsson's Avatar
    kiddsson Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 25, 2008, 02:16 PM
    Heating & AC
    Will a Honeywell RTH6300B1056 programmable thermostat work with a Heat pump?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 25, 2008, 03:34 PM
    Read page 6. It depends upon how many wires you system has and what they are exactly used for.

    http://customer.honeywell.com/techli...0s/69-1717.pdf

    I answered this for you once before and told you it will not work on two stage heat.

    My previous message and your thread.

    https://www.askmehelpdesk.com/heatin...tml#post897949


    You have 2 stage heat. Second stage is the electric or gas furnace and the first stage is for the heat pump.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heating & Cooling Maintenance, Repair & Troubleshooting FAQ from NortherHeat [ 57 Answers ]

Check out these tips and explanations, below, from our Heating and Cooling Expert. Of course, you're also welcome to post questions to this board for more information: Just click the "Ask about Heating & Air Contidioning" button at the top of the page.

Underfloor heating 15 amp GFCI to 30 amp breaker [ 3 Answers ]

I have installed a 240v flextherm heating cable under a floor hoping to use existing 240v. Heating circuit to power it. There are 2 other baseboards on this circuit GFCI thermostat for floor is rated for 15 amp and heating circuit is on 30 amp breaker. I am not getting any power through the GFCI...

Replacement of heating & ac [ 2 Answers ]

Fourteen years ago I purchased a heating and air conditioning system from a local supplier. I installed it myself and have been very satisfied. Absolutely no problems with the ac and only a few minor problems with the heater. Because of age I want to do it again, the supplier said he can't sell to...

Heating & A/C selection [ 4 Answers ]

I'm in the process of trying to select a manufacturer of a home heating and whole house aie conditioning system (70000 BTU furnace 2-3Ton A/C) to replace existing units of 28 years and 35 years. I've had a number of contractors in all quoted close to size I stated, but the info I got doesn't help...

A/C & Heating [ 4 Answers ]

My AAC worked fine the night before then we had a power outage. The next morning I turned it on the compressor outside goes on but nothing happens in the house. I tried the auto and on switch nothing happens. I shut down all electricity still nothing happens I checked the fuse but it doesn't...

View more questions Search