Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Building new shower with glass block
[ 5 Answers ]
I would like to build a new 36' x 48" shower with glassblock on 1 1/2 sides, no shower door and tile on the other 2 walls. My question is: Is it best to buy a premade shower pan that is strong enough to hold the weight of the glass block on the caps or build my own? If prefab, any recommendations;...
Building a shower base in the basement
[ 7 Answers ]
A while back, I talked with Doug, about building a shower base. He told me that using thin set mortar was not correct. Luckily, I re-read the book I am using and found out he was right... you have to use concrete... sorry Doug, but I did listen enough not to go head long into the project without...
Building new shower
[ 2 Answers ]
I am building a new shower in a house with a concrete slab and I want to use a shower drain with weepholes that requires gravel but I cannot find it at HOME-DEPOT. Can you help locate one?
Replace concre-tile shower with new shower pan
[ 1 Answers ]
I am replacing my concrete-tile shower with swanstone 32x60L shower base. The new drain location will be around 4" away from the original drain location. What should I do? Can I use the existing P-trap with the new drain location by connecting them using a horizontal PVC pipe? Or do I have to...
Building a pre-slope for a shower pan
[ 4 Answers ]
I used sand mix (with acrylic fortifier) for the pre-slope I built for a new shower pan. After the mortar sets up(two days later) I checked the surface by knocking on it with a stick, I heard hollow ring instead of solid thud in some spots. What does this mean? The material in the spots where I... View more questions Search
|