Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat Wiring - From Two to One Thermostat
[ 4 Answers ]
Currently my central a/c unit is hooked up to a Honeywell CT3500 Programmable Thermostat. I've noticed that the thermostat can handle heat as well as cooling. My furnace is hooked-up to an older manual thermostat. It is a simple 2 wire set-up - red & white. Could the furnace be hooked-up to the...
Wiring thermostat
[ 3 Answers ]
The old Robertshaw thermostat has a black wire to the G/F screw, a white wire to the W/H/4 screw, a red wire to the B screw, and a jumper between R/RH/5 to Rc. A green wire is not connected. The new Honeywell thermostat needs an R or RH or 4 or V wire. It has screws for G, W O/B, Not used, Y, R,...
Honeywell wiring different from old thermostat wiring
[ 2 Answers ]
I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!
Thermostat wiring
[ 1 Answers ]
I have a TM 1400HC-E-F Thermostat. Purchased a Honeywell RTH3100C Wires on my unit w2=white, O=orange, X=blue, R=red, Y=Yellow, G=green, E=black and W3=Brown Honeywell unit has E Aux Y G ...
Thermostat Wiring
[ 4 Answers ]
I am having similar thermostat problem as krich22774 had on 4/16. I installed the Honeywell RTH230B thermostat during the winter and the heat worked fine. Now when I turn on the A/C nothing happens. I have 5 wires coming from the wall. I started with the following setup: Rh-Red Rc-Blue... View more questions Search
|