 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to add a switched outlet for disposal
I am adding a garbage disposal to my sink and need to add a switched outlet under the sink to plug the disposal into.
I have a an outlet above the sink I can add the switch to. I need to know how to safely wire the switch and outlet. Any help will be appreciated. Timmy |
||||
|
||||
|
From you outlet over the countertop, run a piece of 14/2 with a ground to the box for the switch for your disposal. Then run another 14/2 with a ground to the outlet box under the sink. To hook it up, connect the black wire to the hot side of the outlet on top of the counter. And connect the white wire to the neutral side of the switch and connect the ground wire to the green screw on the bottom of the outlet. This will get the power to the switch box. Next connect the outlet under the sink up with the ground wire to the green screw on the new outlet, hook the black wire to the brass screw on the side of the outlet and the white wire to the silver screw on the other side of the outlet. To finish the connection in the switch box put the two white wires together with a wire nut and push to the back of the box. Take the black wire from the outlet on top of the counter and connect it to one of the screws on a single pole switch and take the black wire from the outlet under the sink and connect it to the other side of the single switch and hook the ground wire to the green screw on the bottom of the switch.
Turn the power back on the first outlet and your are done. |
||||
|
||||
|
Only use 14-2 if it is already 14-2, Could be #12 on a 20 Amp breaker, then DON'T use #14. Just use 12-2.
Also, you may be able to remove enough material to remove single gang mudring, and install 2 gang mudring, then you have a place for a switch and a receptacle. They also make combo switch and recepticles, and combo GFI receptacle and switch in single device. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Switched outlet stopped working, outlet is hot all the time, no matter whether switch is on or off. Replaced the switch and receptacle , still the switc is not controlling the outlet.
I tried to split a switched outlet so the top is always hot and the bottom is controlled by the switch. I snapped the brass connector off and wired the neutral (with black tape) to one of the hot leads with a pigtail. The other neutral went to the silver terminal. Turned the circuit back on and...
What a great site! I would like to incorporate 2 switched outlets in my rewiring of the living room. I have run 12/2 to the primary tv/stereo outlets; from those I continue to two more outlets and then up to a switch. The easy way to make the bottum of the last 2 outlets controlled by switch would...
I am remodeling my basement. When I pulled out my drop ceiling I found that my overhead fluorescent lights were plugged into an outlet controlled by a light switch. I want to replace the fluorescent lights with 4 recessed lights. What is the proper way to wire this setup? Thanks for the help!...
So in our downstairs office there are four outlets, 3 of which are switched by the door. I'm thinking of moving things around but would have to plug the computer into one of the switched outlets. I really do not need any of the outlets to be switched so here is my question. Can I simply pull the...
View more questions Search
|
