Ask Experts Questions for FREE Help !
Ask
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #21

    Feb 13, 2008, 07:03 PM
    I will, too... do not forget to check back tomorrow.. some of the others may have more ideas. Good night!
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #22

    Feb 13, 2008, 07:31 PM
    At this point, I would soak everything in WD40. Stuff a soaked small rag in there and let it do some of it's majik.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #23

    Feb 14, 2008, 07:45 AM
    An extractor was suggested by MASS but I don't believe it has been tried. That is one of the tools a regular home owner might not have as I mentioned early on. I have had drains disintegrate before but this is a first for me for a shower pipe.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #24

    Feb 14, 2008, 08:48 AM
    My only guess is that it was chrome plated steel rather than chrome plated copper.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #25

    Feb 14, 2008, 08:54 AM
    With the right water conditions they can both turn into something as strong as a kids construction paper project.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #26

    Feb 14, 2008, 09:05 AM
    If Marjorie decides to try to pick out the remenants of the coroded pipe, I woudd suggest that she start with a scratch awl. Its sharp point and tapered round shank would probably do less damage to the threads of the ell and be easier than a screwdriver. Never tried this though. What do you think?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #27

    Feb 14, 2008, 11:15 AM
    HK.. I think it is a Great idea. Hope she sees suggestion.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #28

    Feb 14, 2008, 01:09 PM
    Quote Originally Posted by hkstroud
    If Marjorie decides to try to pick out the remenants of the coroded pipe, I woudd suggest that she start with a scratch awl. Its sharp point and tapered round shank would probably do less damage to the threads of the ell and be easier than a screwdriver. Never tried this though. What do you think?.
    I use a small sharp chisel. But the tool mentioned by Mass and Bal is called a "Easy-Out" (see image), Before you tear into the tile and replace the drop eared ell rent a 1/2" Easy-Out and give it a try. Good luck, Tom
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #29

    Feb 14, 2008, 03:06 PM
    Speedball:

    That's an inside pipe wrench not an easy out or am I seeing things.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #30

    Feb 14, 2008, 04:28 PM
    Quote Originally Posted by KeepItSimpleStupid
    Speedball:

    That's an inside pipe wrench not an easy out or am I seeing things.
    Same difference! Sold as a Easy-Out but can be used as a inside wrench. Perhaps you're more used to seeing this one, or perhaps these.(see image) Regards, Tom
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #31

    Feb 14, 2008, 04:58 PM
    Redanmer.. there you go... Some more pics... try the awl if you have one (or go to tool store and pick up an easy out/inside pipe wrench, awl... etc. As we have discussed... there are a few tools to try before opening that wall. Let us know what you decide.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #32

    Feb 14, 2008, 05:25 PM
    Yep, thought it might confuse the guy at Lowe's that sells "Internal pipe wrenches".

    1/2" Internal Pipe Wrench

    Looks like we both got it slightly wrong.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower head broke off [ 5 Answers ]

Yes after my shower head broke off from the main pipe I now have about 1/2" of threaded copper that I need to remove. What's the best way to remove? Thanks! Dan:eek:

Shower pipe broke off in drop eared ell [ 4 Answers ]

Any suggestions on how the get the threads out of the ell? I was investigating a leaky shower head and it ended up being the pipe and ell. The pipe had a break near the ell and while trying to remove it, it broke off. Thanks

Shower Head Pipe Leaking [ 1 Answers ]

I just recently replaced everything in my shower. Everything has gone OK except for the pipe coming out of the wall that hooks to my showerhead. I have PVC coming up to a elbow, then the showerhead pipe connecting to the elbow. It's leaking where the showerhead pipe & elbow meet. No matter what I...

Shower Pipe Drips When Shower Head is Removed [ 4 Answers ]

Hi, I keep buying new hand held showers heads that leak from the hose. I buy Delta brand. After I installed a new one yesterday, it started leaking from the hose again. Today I took off the entire shower head and see that from the pipe that comes out from the wall, it drips water at a pretty...


View more questions Search