Ask Experts Questions for FREE Help !
Ask
    Redanmer's Avatar
    Redanmer Posts: 14, Reputation: 1
    New Member
    		  
    #1

    Feb 13, 2008, 04:29 PM
    My Whirlpool Ultimate care washer is making a funny noise and not agitating ?
    My Whirlpool Ultimate Care washer is making a strange noise ( rattling buzzing type) after it has filled with water and begins to agitate. It won't agitate. I didn't want to let it go any furthur so the water is still in it with the clothes! (
    It is model # LSR8233EQ0 .I am not sure that would help)
    I am concerned it would be very costly. Any help would be greatly appreciated!:)
    Thank you, Marjorie
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Feb 13, 2008, 05:26 PM
    See if unit wii drain and spin. If so the dogs (cam) are worn and need replaced. Easy fix and less than $15
    Redanmer's Avatar
    Redanmer Posts: 14, Reputation: 1
    New Member
    		  
    #3

    Feb 13, 2008, 05:38 PM
    My washer does drain but it doesn't spin
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #4

    Feb 13, 2008, 05:44 PM
    More than likey the coupler is bad since it will not spin. It is between the motor and transmission. Easy fix as well. Less than $35. Look under unit as see if you see some broken plastic. There is a video to see how to change a ApplianceJunk.com.
    Redanmer's Avatar
    Redanmer Posts: 14, Reputation: 1
    New Member
    		  
    #5

    Feb 13, 2008, 06:10 PM
    I looked to see if there was plastic under the unit and I couldn't find any. Will there always be broken plastic if the coupler needs replacing?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #6

    Feb 13, 2008, 07:47 PM
    No, but many times they do break and crumble away. Many times they just break. The replacement ones are made much better than the origanial
    gmbricktcky70's Avatar
    gmbricktcky70 Posts: 1, Reputation: 1
    New Member
    		  
    #7

    May 19, 2012, 02:25 AM
    Have a whirlpool ultimate care hvy dty super capacity plus 8cycle 2speed washer model # lsr8233eq0. Its leaking from top right corner, I have no maual please help!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Ultimate Care II washer will not drain [ 13 Answers ]

The washer runs through the wash cycle but when it is suppose to drain it does nothing. There is no hum just dead. I drained the tub out and disconnected the hose from the back thinking the drain was plugged. But when I did this the rest of the water from the tub drain out no problem. I'm...

Whirlpool Ultimate Care II LSQ9010PW6 [ 1 Answers ]

Hi I am trying to find out what could be cause my washer to be draining its water during the agitate period. When it is suppose to be shaking and washing the clothes it is draining the water and by half way through the agitate process there is no water left in the washer. What could be causing...

Whirlpool Washer Ultimate Care II [ 1 Answers ]

Our Whirlpool washer has developed a strong, musty odor. We think it is coming out of the hole in the agitator. Can the agitator be taken off? What could be making a strong smell? I have tried running clorox through, and it doesn't seem to help. Thanks

Whirlpool Supreme ultimate care washer Model LSR8233E [ 2 Answers ]

My washer will fill with water, agitate and then just stops after the wash cycle. It is sitting here now full of water & clothes. Thanks for any help

Whirlpool Ultimate Care AL5143VW0 stalls [ 2 Answers ]

My Whirlpool will fill and agitate then stall before it drains and spins. It is so frustrating to go switch clothes to the dryer and the washer is still full of water. This happens most of the time on the first spin sometimes on the second spin and sometimes not at all. I am going to replace the...

View more questions Search