Ask Experts Questions for FREE Help !
Ask
    hfalkenberry's Avatar
    hfalkenberry Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 7, 2008, 09:08 AM
    Which wire do I need to complete the chaging system on my briggs and stratton
    I have a 12hp briggs and stratton on a murray lawn mower, I would like to know which wire or wires are needed to hook up to chare the battery, my animals chewed through the wires and all I can do now is start and stop the engine through the new key ignition I installed
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Feb 7, 2008, 05:24 PM
    How many and what color of wires do you have coming out from underneath the blower housing?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs and Stratton Craftmen ELS wire colors [ 1 Answers ]

I am rebuilding a standing mower. I purchased a used 26 HP Briggs and Stratton engine. There are several wires that I need to connect. Does anyone know what the wires from the engine correspond to. How can I find out? Thanks

Briggs Stratton 133400 battery charging system [ 4 Answers ]

Is there a simple book or diagram on line for trouble shooting/ Do you know the basics of how the system works? I don't think mine is charging although the starter seems to work OK once I charge the battery from protable charger.

16.5 hp briggs and stratton [ 2 Answers ]

I have an older 16.5 hp Briggs and Statton riding mower,and have had the starter rebuilt. I was told that before I put it back on the mower I need to have "The Valve" turned or it would be pointless.My question is what valve needs to be turned and where is it located.I am assuming I would takr the...

Briggs and Stratton 16.5 hp [ 3 Answers ]

My friend has a Briggs and Stratton 16.5 hp engine on a riding lawn mower. He asked me if I had ever seen one that leaked oil from under the flywheel. He said there are two holes under the flywheel that oil is seeping out of. I am totally at a loss of the holes he is referring to and therefore I...

10 hp briggs and stratton [ 1 Answers ]

I need to know what the intake and exhaust valve setting for a briggs and stratton generator. Thank you :(

View more questions Search