Ask Experts Questions for FREE Help !
Ask
    sarm4's Avatar
    sarm4 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 11, 2007, 08:15 PM
    Briggs and Stratton Craftmen ELS wire colors
    I am rebuilding a standing mower. I purchased a used 26 HP Briggs and Stratton engine. There are several wires that I need to connect. Does anyone know what the wires from the engine correspond to. How can I find out? Thanks
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Aug 11, 2007, 08:34 PM
    There will be a plug on the right hand side with a red and white, or white and black, or black and red wire, this can only hook up one way and has to do with charging and contains a diode. Then there may be just a single red wire that works the charging. Then on the left hand side , there may be the fuel solenoid ,or antifire switch , which everone you wish to call it wire(s), there will be one or two wires here. This is also a one way hook up. The one way hook ups correspond to the plugs that are attached to the mowers wiring harness.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

16.5 hp briggs and stratton [ 2 Answers ]

I have an older 16.5 hp Briggs and Statton riding mower,and have had the starter rebuilt. I was told that before I put it back on the mower I need to have "The Valve" turned or it would be pointless.My question is what valve needs to be turned and where is it located.I am assuming I would takr the...

Briggs and Stratton 16.5 hp [ 3 Answers ]

My friend has a Briggs and Stratton 16.5 hp engine on a riding lawn mower. He asked me if I had ever seen one that leaked oil from under the flywheel. He said there are two holes under the flywheel that oil is seeping out of. I am totally at a loss of the holes he is referring to and therefore I...

Briggs and Stratton 10 hp [ 1 Answers ]

Can some one help me I need to know what valve setting to set on my briggs stratton generator. Thank you for you help

Thermostat wire colors [ 3 Answers ]

I just removed my old mechanical thermostat. The wire colors were: W = white G = green R = ref Y = yellow O = Orange The rth230b has: W, Y, Rc, Rh, and G. I initially installed the Red in Rc, Y, W, and G. I did nothing with the O wire. When I turned the system on the thermostat started...

Wire colors for heat pump thermostat [ 1 Answers ]

While installing a programmable therostat, two of the indentification stickers fell off the wires. The wires colors are blue and brown and I don't want to hook them up wrong. The "ports" are E and C. Any help would greatly be appreciated. Thanks

View more questions Search