Ask Experts Questions for FREE Help !
Ask
    azxb's Avatar
    azxb Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2008, 07:54 AM
    Furnace just stopped!
    I have heat strips and just had new air handler with a/c installed in August. This morning the furnace was running and I heard a noise (like a pop) and then the fan stopped blowing. I tried to turn it on again and nothing happens. It seems like it smells like something is burning, but I don't know if that's just me now. I checked the breaker and all breakers were fine. There is no breaker just for the furnace, but I did flip the breaker for the air handler off then on.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 6, 2008, 01:30 PM
    ((I have heat strips and just had new air handler with a/c installed in August))

    If the unit is that new call the contractor that sold and installed it for you.

    There should be a warranty.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Stellar Furnace Heating up Furnace Room to 110 Degress? [ 2 Answers ]

I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

It stopped.. [ 2 Answers ]

Okay so I posted something about my dryer making this horrendous squeaking noise and I didn't know if it was safe to use or not. Well I finally said forget it, I have to dry some clothes... so I started it an of course it made it this horrible squeaking, but then it stopped... the dryer is still...

Furnace keep running while condenser has stopped [ 3 Answers ]

Hi, When I switch my thermostat to cool, the furnace fan runs as long as I keep setting at cool, but the condenser stop after about 30 minutes. The fan switch on the thermostat set to Auto. As far as I remember, the whole system should run for a period and then stop for a while (like taking...

View more questions Search