Ask Experts Questions for FREE Help !
Ask
    calsma's Avatar
    calsma Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 5, 2008, 04:12 PM
    MP 600 canon
    I have had a canon MP600 for about 10 months. It is reading an error message telling me I have a paper jam when clearly I don't. Any suggestions?
    ISneezeFunny's Avatar
    ISneezeFunny Posts: 4,175, Reputation: 821
    Ultra Member
    		  
    #2

    Feb 5, 2008, 04:25 PM
    This may be a dumb question, but... you try pressing OK?
    elloyd's Avatar
    elloyd Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 29, 2008, 07:49 PM
    Quote Originally Posted by calsma
    I have had a canon MP600 for about 10 months. It is reading an error message telling me I have a paper jam when clearly I don't. Any suggestions?
    Did you get an answer that worked for you. I have the same problem
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #4

    Apr 30, 2008, 08:51 AM
    Hi,

    Check all of the Canon's paperpath points. Look for a small scrap of paper jammed in the paperpath.

    There are two ways to create jams. 1) paper does not feed properly and 2) no paper was picked and therefore it acts like a paper jam has occurred.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Conversion of 600 meters into acres [ 2 Answers ]

How many acres, if any, are in 600 meters?

Landlord Kept My $600 deposit & You won't believe what for! [ 4 Answers ]

Hi, my name is Bridget and myself along with my 4 children ages 18, 15, 14 and 3 rented a house for 1 year. My deposit was $600 and upon moving out, they charged me for lawn cutting, scrubbing the floors and other simple cleaning and extermination. It mentioned that the extermination was my...

Kenmore Series 600 dryer [ 5 Answers ]

I bought a Kenmore dryer about 2 weeks ago and it makes a loud rattle when running. The repair man came out, took the dryer apart and replaced the heating coil, which he thinks is the only thing that could be causing the noise. It still rattles--very loudly. I want to return the unit but fear...

Sears 600 Heater [ 3 Answers ]

When the Sears 600 Heater ignites, the flame shoots out six or eight inches with a whoosh. It just started doing this. What can we do to fix it?:confused:

Rover 600 brakes [ 1 Answers ]

When I apply the brakes on my rover 600 I can feel a knocking in the brake pedal that can also be felt throughout the car. I changed the brake pads and one of the old set showed a little uneven wear. Should I replace the discs or should I be looking somewhere else for the fault?

View more questions Search