 |
|
|
 |
Junior Member
|
|
Feb 2, 2008, 10:26 AM
|
|
1996 would not start
I have a 1996 saturn sl2 it was running fine had no problem with it I let it sit for 2 day went to start it and it not starting I buy a new battry and it crank but not starting I can tell it getting fuel I will check see if it gettting spark any idea ?
|
|
 |
Junior Member
|
|
Feb 2, 2008, 10:44 AM
|
|
I have and I found 3 fues that say trs 3/4 trs trs pl and one other one 2 of then are 10 am an one is 7.5 none of the 3 work the fues look fine but I change then anyway and they still don't work I have no idea what those mean any idea
|
|
 |
Uber Member
|
|
Feb 2, 2008, 10:46 AM
|
|
No. Just make sure you check both under-hood and under-dash fuses.
|
|
 |
Junior Member
|
|
Feb 2, 2008, 10:50 AM
|
|
I have all fues are good expect for those that don't work any idea what I should do next I know I am getting fuel I am going to see if I am getting I am sure I am ?
|
|
 |
Uber Member
|
|
Feb 2, 2008, 10:55 AM
|
|
Check for codes and check for spark.
|
|
 |
Junior Member
|
|
Feb 2, 2008, 10:59 AM
|
|
Can I jump the plug in to check for code or do I have to get the computer to check it ?
|
|
 |
Uber Member
|
|
Feb 2, 2008, 11:11 AM
|
|
You need a code reader or scan tool--plug it into the Data Link Connector socket under the dash.
|
|
 |
Junior Member
|
|
Feb 2, 2008, 02:38 PM
|
|
Got it started thank for your help
|
|
 |
Uber Member
|
|
Feb 2, 2008, 02:43 PM
|
|
What was the solution?
|
|
 |
Uber Member
|
|
Feb 3, 2008, 09:47 PM
|
|
shawn0634, coming back and telling us you got the car started is fine, but it DOESN'T help anybody else. You need to tell us what the solution was, in order to help others. That's a big part of what this site is all about. It's a two-way street.
|
|
 |
Junior Member
|
|
Feb 5, 2008, 10:26 AM
|
|
I was coming back to tell you what I did to get it started well wild I was turning the key and the engine was cranking I was stepping on the gas at frist it did nothing but after steepping on the gas about 5 time I can feel the engine trying to start so that what I keeping doing stepping on and off the gas I say I must I had to step on and off the gas for other 10 time before the engine start running but it running now.
|
|
 |
Uber Member
|
|
Feb 5, 2008, 12:34 PM
|
|
You shouldn't need to touch the gas pedal to start a modern-day car. Sounds like you may need to replace the fuel filter.
|
|
 |
Junior Member
|
|
Feb 5, 2008, 01:07 PM
|
|
That what I though but that did the trick where the fuel filter locted on a 1996 saturn sl2 do you know and is it hard to change
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
1996 Civic no start
[ 3 Answers ]
I have a 1996 honda civic with a 1.6 engine and it cranks no start. I have no spark or fuel pressure. I was told they had relay problems, so the master relay has already been changed and it still didn't change anything. There is no power to the fuel pump when the key is energized. Any help you can...
1996 Honda Accord LX will not start sometimes
[ 1 Answers ]
Hey All,
Any advice is greatly appreciated! I have 1996 Honda Accord LX. Every now and then (during the last couple months) my car will not start. It won't crank over or nothing. I've tested the battery and seems to be fine. I even thought it was the alarm/killswitch but there are no clear...
1996 CRX won't start-please help!
[ 3 Answers ]
Hi there!
I bought a 96 CRX 1.6Esi four days ago, went to start it today and nothing happened! It just made some clicking noises! I had a look at some of the questions people have asked in the past and I think it sounds quite similar! I did the three questions and the CEL light comes on and goes...
View more questions
Search
|