Ask Experts Questions for FREE Help !
Ask
    toybox's Avatar
    toybox Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2008, 06:40 AM
    GE Top Load Washer will not fill
    I have a GE washer (model #wbse3120b2ww)
    It's VERY slow on the cold water setting. We have checked the hoses and they are not blocked. When you turn the TEMP nob the flow increases but then it slow to a crawl again. And you can hear it clicking like it's broke.
    I've done some reading and it looks like I need a new water inlet valve but I'm not sure.
    Help?:confused:
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Feb 4, 2008, 08:06 AM
    If the water runs freely with it being unhooked from the water valve and the screen in the hose and inlet valve are clean, the yes the valve is bad. Easy to replace. Cost of valve, about $35.00
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Top load washer [ 1 Answers ]

My washer won't spin and rinse. If I put a screwdriver in the place where the lid comes down, it will spin and rinse then. Could it be one of the switches and which one if it is?

GE Top Load Washer [ 2 Answers ]

My GE Eashing Machine will drain but will not spin?

Maytag washer top load [ 1 Answers ]

Oil or grease stain on clothes when washing clothes

View more questions Search