 |
|
|
 |
New Member
|
|
Jan 25, 2008, 07:28 PM
|
|
Exploding vessel sink
My six month old glass vessel sink exploded this morning! I am wondering if others have experienced this, and what caused it.
|
|
 |
Eternal Plumber
|
|
Jan 26, 2008, 06:55 AM
|
|
 Originally Posted by lbh1954
My six month old glass vessel sink exploded this morning! I am wondering if others have experienced this, and what caused it.
This doesn't tell us much. What part blew up? The drain? The glass part of the bowl? Did it really explode oir just shatter? If this was a manufactures defect you have a valid claim. Give us more details. Regards, Tom
|
|
 |
New Member
|
|
Jan 26, 2008, 01:19 PM
|
|
Hi Tom, I was standing in front of it, a loud bang sounded and the entire glass bowl literally exploded outward and downward into a million shards and splinters of (supposedly tempered) glass. I wasn't touching it, or hadn't even run any water yet. My husband had brushed his teeth about 30 - 45 minutes before. Luckily, even though I was barefoot, none of the glass injured me, although some of the pieces are between 7 and 8 inches long and look like daggers. I wish I could send you some of the pictures I took before I cleaned it up. Needless to say I was pretty shaken up by the experience and intend to contact the manufacturer (RonBow), but was trying to do a little research first. Thanks
|
|
 |
Eternal Plumber
|
|
Jan 27, 2008, 05:58 AM
|
|
You might wish to speak to a lawyer before doing anything, As well as a replacement Installed at no cost, you may by eligible for damages
The next thing I would do is contact the manufacture of the sink, bring them in on the situation and see what they have to say. If you failed to read your answer over at Plumbing Networks here's what they had to say.
OVER TIGHTENED
HERE ARE A COUPLE OF LINKS THE SECOND I COPIED THE EXCERPT FROM ON OVER TIGHT.
Glass Sink Failures: "Only The Second Time One Has Exploded"
FIXTURES: Fixture-World.com - Bathroom Vanities
****When installing a drain assembly in any glass sink, be careful not to over tighten the drain assembly bottom screw. This can cause the sink to self-explode due to extra torque and stress placed on the glass. Tighten the drain only to the required level necessary for the water to drain properly out of the sink.
HOPE THIS HELPS. Tom
|
|
 |
Uber Member
|
|
Jan 27, 2008, 06:48 AM
|
|
You can post pictures directly to this site using the "go advanced" tab.
|
|
 |
New Member
|
|
May 21, 2012, 05:25 PM
|
|
My vessel sink of 2 months exploded this morning, the sink had not been used yet as I had just walked into the bathroom and sat on the toilet, the explosion blew glass all over me and I came off the seat, glass went into the toilet and all over the room.The noise was extremely loud and no warning that something was wrong. The brand was a Magickwoods and was all tempered glass. The instuctions for installation was followed to a T and was only hand tightened. Nothing dropped on it ever and it was not being used when it happened. Vicki
|
|
 |
Eternal Plumber
|
|
May 21, 2012, 06:56 PM
|
|
 Originally Posted by vicki57
My vessel sink of 2 months exploded this morning, the sink had not been used yet as I had just walked into the bathroom and sat on the toilet, the explosion blew glass all over me and I came off the seat, glass went into the toilet and all over the room.The noise was extremely loud and no warning that something was wrong. The brand was a Magickwoods and was all tempered glass. The instuctions for installation was followed to a T and was only hand tightened. Nothing dropped on it ever and it was not being used when it happened. Vicki
About the only thing that would explode a glass sink is over tightening. Read on-
****When installing a drain assembly in any glass sink, be careful not to over tighten the drain assembly bottom screw. This can cause the sink to self-explode due to extra torque and stress placed on the glass. Tighten the drain only to the required level necessary for the water to drain properly out of the sink.
When they say, "be gentle" they mean it. Sorry about the loss of your sink. Good luck, Tom
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
What drain should I use for a vessel sink
[ 5 Answers ]
I've been told you need to use a special drain for vessel sinks to get them to drain. What are some of the recommended brands that work well in this application?
Doug
Vessel Sink--Draining
[ 2 Answers ]
We have a vessel sink, installed by a plumber and the sink fills half way before it drains, and it drains with a lot of suction after it fills half way.
The plumber tells us this is normal, I can't believe it
Can you please confirm that he is right, and if not how I would go about fixing it...
Drain for Vessel Sink
[ 1 Answers ]
I just received my vessel sink and now need to purchase the right drain... The actual opening measures 1 3/4" and the recess for the flange/trim is 2 3/4". The various drains I've been looking at measure 1 1/4", 1 1/2" or 1 3/4". Am I limited to 1 3/4" drains or can I use one smaller? Also, my...
Vessel sink draining slow
[ 2 Answers ]
I have an ongoing problem with a new vessel sink.
Question is there a minimum length between the bottom of the sink and the P-Trap?
Hooking up a vessel sink
[ 1 Answers ]
I'm installing a vessel sink atop an adapted wooden vanity (which started life as a night-table). We're raising the vessel up about four inches by constructing a box for it on top of the surface of the vanity.
My question is, can someone show me a diagram of the proper way to extend the drain...
View more questions
Search
|