Ask Experts Questions for FREE Help !
Ask
    comerzoo's Avatar
    comerzoo Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 26, 2008, 09:20 PM
    Toilet Flange
    HOW TO Replace toilet flange?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Jan 26, 2008, 10:10 PM
    Why do you need to replace the flange.. Is it cracked? What kind of toilet flange... PVC or cast iron.. There may be options besides replacing the flange... such as a spanner flange... here, the flange is cracked where the johnni bolts slide into the old flange and the spanner flange slides under the old flange (where damaged) and effectively replaces the johnni bolt slot and can be secured to floor. But why replace the flange? Are you tiling a floor?

    IF you must replace the flange.......

    If it is cast iron then your only option is to crack the old flange out using a chisel and hammer.

    If it a PVC or ABS then you may be able to use an inside pipe cutter to cut the pipe and cement a new flange into place.

    Answer the questions and then we can give best advice!
    comerzoo's Avatar
    comerzoo Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 27, 2008, 09:32 AM
    Thanks very much... on the way to Lowe's to find a spanner flange! That is exactly the problem... flange cracked where the johnni bolt slides in. Any other advice?


    Quote Originally Posted by massplumber2008
    Why do you need to replace the flange...? Is it cracked? What kind of toilet flange...PVC or cast iron...? There may be options besides replacing the flange...such as a spanner flange...here, the flange is cracked where the johnni bolts slide into the old flange and the spanner flange slides under the old flange (where damaged) and effectively replaces the johnni bolt slot and can be secured to floor. But why replace the flange?? Are you tiling a floor??

    IF you must replace the flange.......

    If it is cast iron then your only option is to crack the old flange out using a chisel and hammer.

    If it a PVC or ABS then you may be able to use an inside pipe cutter to cut the pipe and cement a new flange into place.

    Answer the questions and then we can give best advice!
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #4

    Jan 27, 2008, 10:39 AM
    If you find difficult to slide under the flange use a hammer and gently tap under the flange... that should do it. Just be careful when tightening down the old side of the flange so you do not crack that side, too!!

    If this all helped please rate the answer below... thank you. Good luck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet flange [ 2 Answers ]

I am going to replace a leaking toilet flange. I want to rest the new flange on top of my existing tile floor.do I have to fill in the existing gap that will be their when taking out the old flange or do they sell a flange that is bigger to cover the gap. Thanks, dlepper

Toilet Flange [ 2 Answers ]

I am replacing a toilet in the basement of a home I just bought and the cast iron flange is about 1 inch above the concrete and the toilet will not seat right, it wants to rock. Any ideas? Thanks for any help you can give. Mike

Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange [ 1 Answers ]

We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange

Toilet Flange [ 3 Answers ]

Does a flange exist that allows a toilet on the second level to drain into the same pipe as one on the first level of a house. A Y type of fitting I suppose. Issue is plumbing is in the concrete and where we want the upstairs toilet is basically right above a downstairs toilet. If they could...

Toilet Flange [ 1 Answers ]

I'm remodeling my bathroom. I've removed the old toilet and dug up the old flooring and subflooring. Together they were about 7/8" in thickness. Since I will now have a lower floor, what do I do to put in a new toilet flange? The old one was brass and only 1/4" thick and simply had the drain...


View more questions Search