Ask Experts Questions for FREE Help !
Ask
    fansea's Avatar
    fansea Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 26, 2008, 04:33 PM
    Very old crane radiant heat system
    We just recently bought an older home that has a crane radiant baseboard heat system in it. It works great in all the rooms but 1. We traced the lines and it is the last room on the line for the hot water. Is there some way to adjust the heaters so that the last room stays warm too??
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 26, 2008, 05:10 PM
    You will need to bleed that radiator/baseboard of air or
    Find the zone valve/pump that is not working or
    Raise boiler water temp to compensate for that area or
    Re-pipe the zone to get a greater share of hot water to the area or
    Buy a small electric space heater and forget about the problem.

    If you choose the small electric heater you can plug that in yourself.
    For all other fixes call a professional unless you know how to do the work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Overhead crane [ 6 Answers ]

HI. And thanks for looking at my question... I want to build an over head crane in my shop the H beams are 6.5 x 4 x 1/4 the span will be 40' with 16' upright h beams of the same size on each end... The question is how much weight will this hold?? I'm looking for around 1 ton...

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

What heat pump system is best for my situation? [ 8 Answers ]

I'm in the process of making a decision on what heating system to use for better efficiency in my home. My current setup is approximately 8 years old and consists of the following: -oil boiler -american standard 4 ton single speed air handler -american standard 4 ton a/c unit My home was...

System calling for heat but no response from system [ 1 Answers ]

My thermostat is set to 25 which is higher than the current temperature but my heating system is not firing up.. we have hot water - the boiler is a Micron - the heating timer is set to "on" on the program setting, and so is hot water which is fine but we have no heating, it was on earlier and went...

View more questions Search