Ask Experts Questions for FREE Help !
Ask
    slu477's Avatar
    slu477 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2008, 12:22 PM
    Whirlpool washer skips filling and goes to agitation
    Hello,

    My Whirlpool washer model LSR8244EQ1 goes straight to agitation when I turn it on to start a load. It never fills with water. I thought it was a timer issue but a new one didn't change the problem. Is there a sensor that is telling the unit it is full and ready to start washing. Looking for some help.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jan 21, 2008, 03:37 PM
    There is a water level switch (called a pressure switch)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool elite washer not filling with water [ 1 Answers ]

I have been filling my washer with a hose from my downstairs sink. When it gets to the rinse cycle I have to fill it AGAIN:mad: I called sears and told them what was wrong but they sent me the wrong part:mad: I was sent the pump that pumps the water out! Please help!:confused:

Slow Filling Whirlpool Tub [ 6 Answers ]

I'm in the process of buying a new home. During the home inspection it was noted the whirlpool tub in the master bath fills very slowly. By slowly I mean it took 10 minutes to get the water level above the jets. The water pressure is fine, 60 psi. I'm thinking there may be a flow restrictor...

View more questions Search