 |
|
|
 |
New Member
|
|
Jan 20, 2008, 06:41 PM
|
|
Laminate over stair steps
How do you install laminate flooring over stairsteps?
|
|
 |
Senior Member
|
|
Jan 20, 2008, 08:41 PM
|
|
You don't want to do that, they are to slick to use and there just not made to do it, just for flooring, if you want wood or a stain grade look then you need to buy oak treads and do it right
|
|
 |
Full Member
|
|
Jan 21, 2008, 12:18 PM
|
|
I agree glavine hits the nail on the head laminate is just not made for stairs even though the manufacturers will tell you its fine. Aside from it being slippery and it is, some worse than others ,it is also thinner than a solid tread so they tend to be noisy on steps. I realize that oak treads are far more expensive than laminate but you will be so much happier in the long run.
|
|
 |
Home Repair & Remodeling Expert
|
|
Jan 21, 2008, 12:33 PM
|
|
Don't want to beat a dead horse but we had a similar question last week. It is slippery and noisey and I do not do this installation even if requested. If you absolutely have no other option for reasons unclear to us make sure you glue the laminated to the step and riser. Most companies make a matching stair bull nose to give you a better, finished front edge to the step. No padding or backer, just glue, nail the bull nose.
|
|
 |
New Member
|
|
Mar 31, 2009, 09:59 AM
|
|
I agree. A cust want this done for her stairs. I have laid 1800 sq of flooring already. If I use the oak treads for the stairs, can I use the laminate for the landing (only). Or could you use the laminate for the stairs with a carpet runner. Which would be best. Thanks for the response
|
|
 |
New Member
|
|
Nov 12, 2009, 06:32 AM
|
|
See videos of laminate flooring on stairs http://www.youtube.com/TheFloorfitter
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Lamanate flooring on stair well
[ 3 Answers ]
Im currently doing some work in my house, I have a stair case that consists of five stairs, then a landing about 1.2msq, then more stairs then another landing, how do I lamanate the stairs and carpet the landing, bearing in mind I have three kids who run up and down them??
Concrete stair tread finish
[ 3 Answers ]
I'm building an interior concrete stair and need tread finishing ideas.
I would also like to incorporate a bullnose, and grooves as a non-slip pattern in the tread surface.
I've not been able to find a edging tool to create the bullnose/groove combination.
Any suggestions?
Stair rail end piece
[ 1 Answers ]
What is the best way to join the stair rail end piece to the stair rail. I have both the stair rail and the end piece cut at 45 degrees. The end piece is 3 1/4 inches long. Thanks for all suggestions.
Stair building
[ 1 Answers ]
I'm in the process of finishing the basement and only have the stairs left as far as framing.
What do you think, rework the stringers that are here or tear them down and rebuild them? They will remain open and have a railing running along the landing and down the stairs. My main concern is how...
View more questions
Search
|