Ask Experts Questions for FREE Help !
Ask
    petey1x's Avatar
    petey1x Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 14, 2008, 09:59 PM
    Pilot will not stay lit
    My mother has an old floor heater that is about 45 to 50 years old and needs a key to turn the heat up and down, also to turn on the gas for the pilot light or off in the summer. When I try to light the pilot it will flicker but not stay lit. I have tried to clean the pilot tube with no such luck. This Dinosaur of a heater needs to be replaced but I need to make sure my mother stays warm until that time. Does anyone have any Ideas, also I have checked other sites and they talked about the electric coupling. Looking this thing over the other day I find that it does not have any type of electrical device unless I'm looking at it wrong.
    Lastly While looking it over being the dinosaur that it is I have no idea the make or model.
    Please Help:confused:
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 14, 2008, 10:22 PM
    You need to clean the pilot orifice. It has a very small hole in it that can get plugged up over time.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pilot light won't stay on [ 12 Answers ]

I bought a Kenmore power miser gas water heater in May of 2002 The First 3 years and 8 month's I had the waterheater I did not have 1 problem. In January of 2006 the light went out and tried to light it. It stayed Lid until I released the button and it went out. I called sears Because it is...

Pilot light does not stay lit [ 2 Answers ]

My pilot light does not stay lit. I have to light it 2 or 3 times everyday. Is it the igniter or the thermocouple?

Pilot won't stay lit on Bryant 394GAD036100 [ 1 Answers ]

I have a Bryant model 394GAD036100 furnace, no air. The pilot light will light but will not stay lit when turned to "ON" position on gas valve. Unit is at least 15 years old, with a thermocouple, no wires. The pilot light seems small after releasing knob to be able to rotate to on position

Pilot won't stay on [ 3 Answers ]

I have a snyder-general furnace and my pilot won't stay on after you turn it from pilot to on I tried evrything... is it the thermocouple or does this furnace have a sensor... and if so how do I change it out... furnace was manufacture in 91...


View more questions Search