 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
First check your aerator to make sure it isn't plugging up with debris. If the pressure/volume does not increas with the aerator off then the new faucet is likely picking up junk in the mixing valve. Before disassemling the new valve check your pressure at the stops below the sink. If both stops have good pressure then you'll need to pull the cartridge. If you need further help just write back.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We recently tapped into the hot water pipe for a basement bathroom. After doing so the hot water pressure in my single handled faucet is much lower. None of the other hot water in the house has been affected. I think the pipe we tapped into is the pipe that only supplies the kitchen sink and...
My cold water pressure is dripping out of my kitchen sink. The rest of the house is fine. Now my hot water pressure is doing the same thing. What should I do?
We have low water pressure in our kitchen sink. What causes this and how can we fix this?
I attempted to change out my kitchen sink sprayer hose, when I turned the water back on I get ver little water pressure from either hot or cold water.
I have lttle to no pressure when I turn on the water in the kitchen sink. The cold it really strong. I am clueless and don't know what to do. Please help! :(
View more questions Search
|
