Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Safety switch keeps tripping
[ 4 Answers ]
I have a Carrier unit with a Becket Model "AFG" oil burner. Unit was installed 5/2002. It was given its maintenance service on 11/15/07 by Carroll Ind. I was delivered 100 gal of oil the week before Christmas around the 18th. System has been working fine until 2 weeks ago when the Honeywell...
Bryant 394GAD Vent Safety Switch Trips
[ 1 Answers ]
I have a Bryant 394GAD that runs fine for days, then begins to have issues with the Vent Shut Safety Switch tripping and shutting down the flame. The fan continues to run and blow cold air throughout the house. If I reset the switch, the burners will come back on and the furnace will run. ...
New switch trips breaker
[ 1 Answers ]
I added a plg strip to an existing circuit,and plugged fluorscent fixture into strip.I then wired a switch and plugged it into strip. Off the switch I ran two 14/3 cables with plugs on the end to be used with portable lights.When switch is on everything works fine, but when I turn switch to off...
Light switch trips breaker
[ 4 Answers ]
Here's question number 2 in switching out fans and light fixtures. I replaced the ceiling fan in my son's room with one from our previous home. After getting everything wired rather difficult because of some very short wires, the ceiling fan will work with the remote, but using the wall switch...
GFI trips when fliping switch
[ 5 Answers ]
I have an outdoor fountain with a pump that is pluged into a new outlet next to the pump. I connected that outlet to an outdoor switch on the porch so I can turn the punp on and off without going to the fountain. I taped into an existing outdoor outlet on the porch and put the switch next to... View more questions Search
|