Ask Experts Questions for FREE Help !
Ask
    Camishpa's Avatar
    Camishpa Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2007, 10:33 AM
    Ritetemp programmable thermostat room temperature!
    My Ritetemp model 8035c thermostat all of a sudden stopped displaying current room temperature in the main screen (middle). It displays only C or F up to 0 degrees or 32 degrees now. Every time the heat comes on it continues to run unless I manually shut it off. I've tried resetting but no results. Any help would definitely be welcomed.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 31, 2007, 12:58 PM
    Sounds like you might have a bad thermostat.
    Next time but a Honeywell.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blown Ritetemp 8050C thermostat [ 2 Answers ]

I have a 6 year old Trane heat pump air conditioning system and about 6 months ago added the Ritetemp 8050C thermostat. It worked flawlessly for 6 months then all of a sudden when I went to manually lower the temperature in cooling mode, the thermostat display and most of its functionality "blew"...

Replacing Analog Thermostat with Non-Programmable Digital Thermostat [ 1 Answers ]

Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!

Programmable Thermostat, Major Temperature Fluctuations [ 1 Answers ]

We installed a NOMA Programmable Thermostat yesterday and are having problems with current temperature reading fluctuations. Watching the thermostat this morning the current temp went from 17.2 to 23.4 to 19.6 and back down to 17.4 all within a couple of minutes. Does the thermostat need time...

Janitrol to ritetemp thermostat conversion [ 1 Answers ]

I am trying to install a ritetemp 8050C model thermostat to replace the Janitrol thermostat that came with my Goodman-Janitrol two-stage, heat pump system. There is an "E" terminal on the Janitrol unit (seven wires) but no corresponding terminal on the ritetemp unit(six wires). What is the...

Temperature control/thermostat [ 4 Answers ]

Our new home of approximately 2000 sq. ft. has two heating sources, a heat pump for the upstairs and a gas furnace for the first floor. We do not have a basement. The stairway is open to a second floor loft with two bedrooms and a bath enclosed. I have set back thermostats on both heaters. I am...

View more questions Search