Ask Experts Questions for FREE Help !
Ask
    dp3020's Avatar
    dp3020 Posts: 8, Reputation: 1
    New Member
     
    #1

    Dec 28, 2007, 12:13 PM
    2001 Ford Crown Vic
    I have a 2001 Ford Crown Vic. The cigarette lighter is not working and the cover that has the location of the fuses was not on the car when it was bought. I have checked the fuses and they all appear to be fine. There may not be a fuse in the proper location. Any help on where the fuse may be would be appreciated.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Dec 28, 2007, 01:02 PM
    Use a test light or multimeter to test all under-dash and under-hood fuses. Test for power "through the fuse." Here's how:

    https://www.askmehelpdesk.com/cars-t...tml#post252145

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2001 Ford Escape - Electric door lock mystery [ 1 Answers ]

I have a 2001 ford escape, it has electronic locks and it seems like they have a habit of locking/unlocking randomly, I'm guessing that they should automatically lock after I start driving the vehicle but sometimes they don't lock and then after awhile they do, this can happen in my driveway or at...

Brake lights on a 2001 ford explorer [ 1 Answers ]

The brake lights on my truck will not come on and the parking lights will not either. I checked all of the fuses and the bulbs and they are OK. So what's wrong?

2001 Ford Ranger [ 4 Answers ]

I recently purchased a 2001 Ford Ranger XLT. The serpentine belt had a bit of an inconsistent 'squeak' sound. I looked at the belt, and found that it is dry-rotted a little and has cracks. I sprayed a product that is supposed to eliminate the squeaking noise (should that be the true problem),...

2001 Ford [ 1 Answers ]

How do you change the 02 sensors

2001 ford ranger edge v6. Trans fluid [ 1 Answers ]

This truck has 60,500 miles on it and this has the original trans fluid in it. Seems to be working fine. I hear two stories about changing trans fluid. One says you should change the filter too, one says flush only is fine. Which is true?


View more questions Search