Ask Experts Questions for FREE Help !
Ask
    TONYT2626's Avatar
    TONYT2626 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 25, 2007, 08:59 AM
    Dryer not heating up-Kenmore EliteH3E
    Help-my dryer runs but there is no heat:confused:
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Dec 25, 2007, 09:07 AM
    Check the thermal fuses and element for continuity. Temove one wire from each before checking ti insure you are getting correct readings. Chack the exhaust to make sure it is clear and free. Merry Christmas
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer not heating [ 3 Answers ]

I have a Kenmore Dryer model 110.73022100 that runs but doesn't heat up. I have replaced the ingnitor, thermostate and thermostate fuse and nothing has helped. I have detached and check the gas line which works fine but there is no ingition of the pilot when the dryer is turned on. Any...

Kenmore Dryer (90 Series) not heating up [ 1 Answers ]

My Kenmore Dryer (90 Series) is not heating up. I have replaced the Hi-Temp thermostat and thermal cut-off devices. The coil is good (~10.1 ohms). When I detach one of the wires from the circuit, I measure about 80 volts (AC) between the heating coil and the operating thermostat or ~110 v...

Kenmore Dryer not heating [ 1 Answers ]

I'm working on my mothr in laws 10 yr old kenmore dryer that runs, but the heat element does not get hot. I have taken the element out found no breaks in it, it ohms good. I have 110 volts on both wires to the element. What am I missing ?

View more questions Search