 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Im having a problem with a light switch... the light stays on regardless of the position of the switch. I have swaped the switch out with a new one and still have the same problem. The switch controls to recessed lights over a fireplace. In the box on the wall there are several wires: 2 white...
It's worth noted that I am a complete novice, so please be patient with me. I want to replace an existing pilot light switch with a single-way lighted switch. The existing setup has four terminals (red wire, black wire, white wire, and ground wire). The red wire goes to the left, the black wire...
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...
One Switch two lights - the second light furthest away from light won't turn off but the first one does Worked until I swopped the roses. Suspect that didn't do something right when putting them back. Up to now - left bulb out but need to get it to work now.
I am not an electrician, but I have had some luck doing smaller electrical work around my house, and I need some advice. I have a house built around 1936. Five of the rooms have central lighting. Four other rooms might have had overhead lights at some point, but if so those lights have been...
View more questions Search
|
