Ask Experts Questions for FREE Help !
Ask
    firozazeez's Avatar
    firozazeez Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 10, 2007, 05:11 AM
    Pressure unit
    What is psid?
    syed ahmed's Avatar
    syed ahmed Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Dec 11, 2007, 04:28 AM
    Hello mr fairoz it is actualll psi which is abbreviated as pounds per square inch and is used as a unit for measuring the pressure in english units
    vbw1711's Avatar
    vbw1711 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 11, 2007, 05:05 AM
    What are pressurization units and what is its significance in Chiller system?
    caibuadday's Avatar
    caibuadday Posts: 460, Reputation: 10
    Full Member
    		  
    #4

    Dec 11, 2007, 02:33 PM
    Quote Originally Posted by firozazeez
    what is psid?
    Pound per square inch differential; pressure differential
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Poor Water Pressure in Shower - Symmons Temptrol Unit [ 2 Answers ]

We have a Symmons Temptrol Model A shower/bath unit installed which has very poor water pressure when using the shower head. The bath facet pressure is adequate but does diminish when increasing the hot water temperature. When switching to the shower the water pressure slows to a dribble....

Chilled water system design pressure and pressurization unit [ 2 Answers ]

Hi Could u tell about chilled water line pressure what pressure should be maintain for g+7 building if chiller installed on roof and pump room at seventh floor. And could u tell me capacity of pressureization vessel pump watts for 14mtrcube system volume location same pump room(seventh floor)

Size of ac unit needed to match a carrrier heating unit [ 3 Answers ]

I had a Carrier natural gas heating unit installed in 2003. Model number 58STA/STX 070 Catalog number 535-80105. My ac unit has gone out and the company I bought the heating unit from has gone out of business. What size ac unit will match the heating unit? Thanks so much!:cool:

Replacement of electric unit with gas unit in mobile home [ 2 Answers ]

#1 Dec 27, 2006, 10:32 PM vcavina New Member Join Date: Dec 2006 Location: California Posts: 7 Electrical wall heater in single wide mobile home

No pressure for 3 unit building [ 1 Answers ]

I am in a 3 unit condominium building. We are not getting any pressure from the city. We have a pump which, to the best of my knowledge, has never been used. Is it possible, somehow, that we let out all the pressue that is generally in the pipes and need to run the pump? If we run the pump what PSI...

View more questions Search