Ask Experts Questions for FREE Help !
Ask
    polaris41's Avatar
    polaris41 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2007, 10:53 AM
    Having troubles with heil gas furnace
    I have a heil forced air heating furnace that is going on and off and will not stay on to come up to temperature. It will not burn for more that a minute before it cuts off again. It was working fine just a week ago and now it is doing this. Would you have any idea of what may be wrong and what we can do to fix it.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 8, 2007, 12:24 PM
    Check and clean flame senser,, is fiter clean,,
    mgroman's Avatar
    mgroman Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Dec 8, 2007, 04:35 PM
    Might need to replace high limit switch.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil Furnace [ 10 Answers ]

I have A Heil Furnace that starts up just fine Model #NDG1075DFo1, but after its running for 5 minutes or so it gets another call for heat, fills the gas box with naatural gas and re-lights this mix pretty violently. This may happen a few times during the heating cycle until the thermostat is...

HEIL furnace [ 1 Answers ]

Our heil furnace won't stay lit. It goes out after we release the pilot button. Any suggestion?

Heil furnace [ 2 Answers ]

I have bought a house with a furnace and I cannot get the pilot to light. I am asking for some type of manual so I can figure this out. The model is VG-80MD-1 and the serial is H73838067. The house was built in 1977 and I am sure this is the original Thanks for any info

Blower won't come on Heil furnace [ 2 Answers ]

I have a heil furnace in a home I just purchased. The first day it worked fine. Second day, it fires up, I can hear a motor running, but the blower doesn't come on. Relay switch? Thank You!

HEIL furnace will not stay lite [ 3 Answers ]

I have a older heil furnace (Model#867.769445) about 20 years old. When the pilot turns on after a few seconds the burners light, then after a second or two they shut off, on again, and off. They will do this continually until finally they stay on or the furnace stops trying to heat. I have also...

View more questions Search