Ask Experts Questions for FREE Help !
Ask
    Rayz's Avatar
    Rayz Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 7, 2007, 11:46 PM
    240v Outlet Installation
    I just added a sub panel for my workshop using a 50amp breaker at the main panel connecting to the sub panel via 6-3 cable. The 120 v single pole 20amp breaker / circuit works fine however I'm having trouble with the 240v side of the deal... I have a dble pole 30 amp breaker with a 10-3 cable running to a couple of quad boxes daisy chained together for an air conditioner/heater and other equipment. But the fuse blows every time a flip the breakers to on. Help please... I believe the problem resides in how I daisy chained them. So I guess the question is where do I connect the two(black and red) hot (120v) wires, and the (white)neutral as well as the ground. Thanks in advance for your help... Rayz
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Dec 8, 2007, 05:18 AM
    Not sure how you have 240 volt outlets "daisy chain". Can you provide pictures of your connections?
    Cobraguy's Avatar
    Cobraguy Posts: 140, Reputation: 11
    Junior Member
     
    #3

    Dec 8, 2007, 05:59 AM
    Also, is the breaker popping with the equipment attached or not.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Dec 8, 2007, 08:43 AM
    If you are using regular recepticles, they need to be on 20 amp and not 30 amp breaker.
    If you are going to a location, that goes to 2 boxes or directions. Then the black and white would be for 1 circuit, red and that same white would be the second circuit. Tie all grounds together.
    These need to be on opposite phases.
    "When I turn on breakers"?What breaker trips fuse?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

120V or 240V for heaters? [ 6 Answers ]

I apologize in advance for seeming daft :confused: , but I am still missing the 120V vs. 240V issue for small appliances such as room heaters. There seems to be an advantage of 240 V only when you may be pushing your circuit; I gather one can put twice as much wattage (e.g. heaters) on a 20A...

Outdoor electrical outlet keeps tripping gfci outlet [ 3 Answers ]

Until just recently my christmas decorations would light up when we plugged them into the outdoor electrical outlet. Now when we plug it in the gfci outlet in the garage keeps getting tripped and the lights won't come on. Even when we reset the gfci, once we plug in the chord it gets tripped...

240v heat & 120 outlet on same line? [ 4 Answers ]

Hi - I have a 240v convection heater with no 120v features (fan, timer etc). I have a dedicated run of 12/3 wg available. Is there any way to use that spare 3rd wire to provide a couple 120 v outlets? Thanks, Taylorsk

Outlet installation [ 1 Answers ]

Hi, I was wondering if the ground on the outlet is required to be up or down, or is it a matter of preference. Thank you much

240v light - what do I need to know? [ 4 Answers ]

Our local HD has some 240v high-output lights on sale and I'd like to install in our barn but I'm unsure what's involved. How do I tell what the draw will be for breaker and wire size? Is the a light switch for a 240v circuit? Thanks for your advice.


View more questions Search