Ask Experts Questions for FREE Help !
Ask
    therinnaiguy's Avatar
    therinnaiguy Posts: 153, Reputation: 5
    Junior Member
     
    #1

    Dec 5, 2007, 06:49 AM
    V-belt twisting
    When ever I engage my auger on my Sears snowthrower, The V-Belt twists upsidedown and burns. I did just replace it to what I thought was the correct size. I was very tight to get on. Did I get a too small belt? Is this why it is twisting?:(
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Dec 5, 2007, 08:25 AM
    Not sure why the belt is twisting but you need to use OEM belts. Try Welcome to the Parts Store to insure you have the correct part. How was the thrower working prior to the new belt?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    Dec 5, 2007, 09:53 AM
    Seems like he/she wasn't happy with my answer and you gave him/her the same answer in a different named thread no less.

    https://www.askmehelpdesk.com/tools-...ue-157758.html
    therinnaiguy's Avatar
    therinnaiguy Posts: 153, Reputation: 5
    Junior Member
     
    #4

    Dec 6, 2007, 06:49 AM
    Quote Originally Posted by ballengerb1
    Not sure why the belt is twisting but you need to use OEM belts. Try Welcome to the Parts Store to insure you have the correct part. How was the thrower working prior to the new belt?
    I just puchased it and the old belt was beyond reckognition. I am starting from scratch. I looked up in Sears Parts to get the belt size, it was not much help. Thanks for your help.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #5

    Dec 6, 2007, 08:14 AM
    If you really wanted some help, you could have given us the model number.

    If you want some hoops to jump through, you can try this. Bear in mind it's not recommended,

    Go here: http://www.daycoproducts.com/

    Under Application and Lawn and Garden search for your Dayco belt.

    Then locate a NAPA auto store. They may have the belt.

    Another method is to go to the Big Box Store Lowe's. They have a belt cross reference by model number, but it's not comprehensive.

    By all means, report back.

    KISS
    therinnaiguy's Avatar
    therinnaiguy Posts: 153, Reputation: 5
    Junior Member
     
    #6

    Dec 7, 2007, 07:43 AM
    Thanks, this is very helpful. And yes a model number would have helped. The blower is at my Son's home and he is getting it for me. Thanks to All!
    therinnaiguy's Avatar
    therinnaiguy Posts: 153, Reputation: 5
    Junior Member
     
    #7

    Dec 7, 2007, 08:57 AM
    OK, I got the model # 536.884810 and visited Sears.com for part number. I found that their part number translates to a 4L30 belt. I found this by adding it to cart. I can get the same belt for a lot less at an auto parts store. The Dayco number is L430. I thought this was the same belt size that I put on a month ago. Now it's burnt so bad I can not read the numbers. I picked up a new 4L30 belt and will try it all over again. Just for kicks, I am going to rotate the auger asembly to see if it is not binding up.

    Any other suggestions are always welcome.

    Thanks Guys and or Gals:) :D !

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn tractor blade drive belt twisting/breaking [ 3 Answers ]

I recently replaced the blade drive belt on my riding mower and it broke after 3 hours. I checked for anything that would cut the belt, found nothing, and installed another new belt. After engaging the blades for 20 seconds I stopped and checked the belt and noticed it had twisted. This happened on...

I need to replace my deck belt on my troybilt 17hr. 42' deck belt diagram [ 4 Answers ]

I need to replace my deck belt on troybilt 17hr. 42' riding lawnmover. Be nice to have a diagram

Belt diagram murray 17 hp 42 inch belt [ 4 Answers ]

I boke the primary belt on my murray 17 hp 42 inch mower and I can't seem to remember how it went on,please help.:o

Which Belt Do I Need? [ 2 Answers ]

I have a ford yt16h tractor and need the secondary drive belt but can't find what size it is. Can anyone help me? Hanks, tom

New Fluorescent Bulb (the small spiral twisting tube type) [ 3 Answers ]

After purchasing and then installing three (3) of those new fluorescent bulbs to replace some of my incandescent bulbs, I have some questions. 1. I hear a low volume “humming” in 2 of the 3 bulbs. One is louder than the other, but there is one as quiet as a sleeping baby. Is that noise...


View more questions Search