Ask Experts Questions for FREE Help !
Ask
    johnrock11j's Avatar
    johnrock11j Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 4, 2007, 06:25 PM
    Intertherm furnace lighting
    I have a Intertherm M1M furnace and when It kicks on the combustion blower runs for a long time before the furnace lights.The red status light occasionally blinks two times and according to the label it's saying the pressure switch is open but Im not sure.It will click and the ignitor will start glowing and then It will click again and the ignitor will go out.It will usually do this several times before lighting.It doesn't do this all the time but sometimes It will click and click trying to light for 10 to 15 minutes.
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
    		  
    #2

    Dec 4, 2007, 06:33 PM
    Check for a clear unobstructed tubing on the pressure switch with no cracks, check the fitting this tube attaches to be sure it is not restricted. Good luck, Mike
    johnrock11j's Avatar
    johnrock11j Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 5, 2007, 05:43 AM
    Quote Originally Posted by acetc
    Check for a clear unobstructed tubing on the pressure switch with no cracks, check the fitting this tube attaches to be sure it is not restricted. Good luck, Mike
    I checked hoses and fittings and everything looked good.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Intertherm furnace [ 1 Answers ]

I have a mobile home with a intertherm heating and air unit. My furnace will not come on in auto but you can set it on ventilate and it will blow. What is the problem?

Intertherm Furnace [ 4 Answers ]

My furnace Intertherm Model # MHHB-077ABHR-06 just starteed kicking the blower in and out. The blower will run for 30 seconds, then stop, about 10 seconds later, it'll kick in again. Sometimes this will go on for 15 minutes. The flame is kicking in and it has electronic ignition.

Intertherm furnace [ 1 Answers ]

I own a 1985 modular home and the intertherm blower fan on my furnace quit working is it too hard to fix or change?:confused: Also what is the cost to fix it?:eek: Please help!! :) Thank you Rachell

View more questions Search