Ask Experts Questions for FREE Help !
Ask
    Daviddj12's Avatar
    Daviddj12 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2007, 03:25 PM
    Where do I put the AC compressor call wire on Honeywell zoning?
    I have installed a Honeywell TZ-4K zoning kit. Everything works except the AC. I don't know where to attach the call wire for the outside compressor. If I couple it with the cooling(yellow) wire, the Honeywell unit switches the 24v over to the heat(white) wire. Does this wire need to go back to the central(HVAC) unit.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 3, 2007, 07:05 PM
    All the instructions for this system are included in the many pages of documentation that comes with the kit.

    Here is all the information you will need.

    http://customer.honeywell.com/techli...0s/68-0259.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Janitrol 7 wire to Honeywell RTH230B 5 wire [ 3 Answers ]

I currently have a Janitrol digital thermostat. I can't read the model #. It has 8 terminals and 7 wires hooked up. Terminal - Color Y - Yellow Com - Blue R - Red G - Green w2 - Looks white E/w3 - Looks pink O - Orange B - Nothing

How to wire a new honeywell thermostat [ 4 Answers ]

Hi there honeywell rth 5100b I am getting heat with fan but the ac compressor not coming on for cooling,fan does though I have 5 wires coming out of wall to thermostat White Red Yellow Green Black

Compressor wire [ 4 Answers ]

Hi I have a Ruud AC unit I'm trying to get a couple more weeks out of and me living in Florida means I can't be without AC. The purple wire from the air compressor burned off and I was wondering what wire I could use for now to replace it? Please help

Switching from Trane (6-wire) to Honeywell (5-wire) [ 6 Answers ]

I am wanting to change from a Trane tstat (model TAYSTAT241) with six wires: Green to G1, Red to R, Blue to B, White to W1, Brown to W2, and yellow to Y1 to a Honeywell Programmable (RTH230B) with five connections: Rh to Rc (jumped), W, Y, G. I have a Trane XV90 (model # TXC031C4HPCO-1999). My...

Wire Honeywell Humidifier [ 2 Answers ]

I have an HE360A humidifier, an h8908b manual humidistat and a two stage Trane Furnace. The Furnace already has a 120 to 24v transformer wired to the furmace, which is how the old April air humidifier was wired. There are two yellow wires coming out of the water inlet solenoid on the...

View more questions Search